Saltar al contenido
Merck

522651

Sigma-Aldrich

1,2,3,4-Tetrahydronaphthalene

anhydrous, 99%

Sinónimos:

Tetralin solvent

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización


About This Item

Fórmula empírica (notación de Hill):
C10H12
Número de CAS:
Peso molecular:
132.20
Beilstein:
1446407
Número MDL:
Código UNSPSC:
12352002
ID de la sustancia en PubChem:
NACRES:
NA.21
grado:
anhydrous
Ensayo:
99%
bp:
207 °C (lit.)
presión de vapor:
0.18 mmHg ( 20 °C)

grado

anhydrous

Nivel de calidad

densidad de vapor

4.55 (vs air)

presión de vapor

0.18 mmHg ( 20 °C)

Ensayo

99%

Formulario

liquid

temp. de autoignición

723 °F

lim. expl.

0.8 %, 100 °F
5 %, 150 °F

impurezas

<0.005% water

índice de refracción

n20/D 1.541 (lit.)

bp

207 °C (lit.)

mp

−35 °C (lit.)

densidad

0.973 g/mL at 25 °C (lit.)

cadena SMILES

C1CCc2ccccc2C1

InChI

1S/C10H12/c1-2-6-10-8-4-3-7-9(10)5-1/h1-2,5-6H,3-4,7-8H2

Clave InChI

CXWXQJXEFPUFDZ-UHFFFAOYSA-N

¿Está buscando productos similares? Visita Guía de comparación de productos

Descripción general

1,2,3,4-Tetrahydronaphthalene (Tetralin), a bicyclic hydrocarbon, is a constituent of petroleum and coal tar. It is used in coal liquefaction and as an alternative to turpentine in paints and waxes. Degradation of tetralin by Corynebacterium sp. strain C125, and by pyrolysis have been reported. A study reports the transformation of naphthalene to tetralin in the presence of activated carbon supported molybdenum carbides. Dehydrogenation of tetralin by microwave heating in the presence of platinum-supported activated carbon has been investigated.

Aplicación

1,2,3,4-Tetrahydronaphthalene may be used as a raw material in the synthesis of fullerenes.

Información legal

Palabra de señalización

Danger

Frases de peligro

Clasificaciones de peligro

Aquatic Chronic 2 - Asp. Tox. 1 - Carc. 2 - Eye Irrit. 2 - Skin Irrit. 2

Riesgos supl.

Código de clase de almacenamiento

10 - Combustible liquids

Clase de riesgo para el agua (WGK)

WGK 2

Punto de inflamabilidad (°F)

159.8 °F - closed cup

Punto de inflamabilidad (°C)

71 °C - closed cup


Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Hyunjoong Chung et al.
Nature communications, 9(1), 278-278 (2018-01-20)
Martensitic transition is a solid-state phase transition involving cooperative movement of atoms, mostly studied in metallurgy. The main characteristics are low transition barrier, ultrafast kinetics, and structural reversibility. They are rarely observed in molecular crystals, and hence the origin and
Fullerene production in sooting flames from 1,2,3,4-tetrahydronaphthalene.
Alford JM, et al.
Carbon, 46(12), 1623-1625 (2008)
Activated carbon supported molybdenum carbides as cheap and highly efficient catalyst in the selective hydrogenation of naphthalene to tetralin.
Pang M, et al.
Green Chemistry, 14(5), 1272-1276 (2012)
Experimental and kinetic modeling study of tetralin pyrolysis at low pressure.
Li Y, et al.
Proceedings of the Combustion Institute, 34(1), 1739-1748 (2013)
Hydrogen production from tetralin over microwave-accelerated Pt-supported activated carbon.
Suttisawat Y, et al.
International Journal of Hydrogen Energy, 35(12), 6179-6183 (2010)

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico