MTGR65000

Cápsula de filtración Aervent^® 50

pore size 0.2 μm

• Sinónimos: EPA Est. 041237-FRA-001
• Código UNSPSC: 23151806
• eCl@ss: 32031690
• NACRES: NB.24

Propiedades

• Materiales: PTFE membrane; polypropylene ; polypropylene housing
• Nivel de calidad: 400
• esterilidad: non-sterile
• Compatibilidad de esterilización: gamma compatible
• Línea del producto: Aervent^®
• Características: hydrophobic
• fabricante / nombre comercial: Aervent^®
• Parámetros: 2.1 bar max. differential pressure at 25 °C; 4.1 bar max. inlet pressure (60 psi) at 25 °C
• técnicas: gas filtration: suitable
• Longitud: 5.3 cm (2.1 in.)
• Anchura: 2.4 in.
• Diámetro: 6.2 cm (2.4 in.)
• filtración área: 19.6 cm²
• impurezas: ≤0.5 EU/mL (LAL test, Aqueous extraction)
• extraíbles gravimétricos: ≤1.0 mg
• Matriz: Aervent^®
• tamaño de poro: 0.2 μm pore size
• punto de burbuja: ≥1100 mbar (16 psig), nitrogen with 60/40% IPA/water at 23 °C
• Adaptador: 3 mm (1/8 in.) male NPT inlet/outlet connection (One side); inlet/outlet hose for 6.5-9.5 mm I.D. silicone tubing (Other side)
• Condiciones de envío: ambient

Descripción

Descripción general

This Aervent^® hydrophobic Capsule filter contain a 50 mm Aervent PTFE membrane in a bi-directionally supported polypropylene casing. This sterilizing-grade filter, with a 0.2 μm pore size and 19.6 cm² filtration area, is designed for critical small scale gas line and air venting applications. The hydrophobic Aervent PTFE membrane within MTGR65000 provides high flow rates and throughput, low extractables and particle shedding, and broad chemical compatibility. For traceability and easy identification, each Aervent-50 filter is hot stamped with its catalogue number and lot number. Each Aervent^® Capsule Filter is integrity tested during manufacture.

Aplicación

Typical Applications

• Sterile venting of vessels and carboys
• Autoclave vacuum break lines
• Low volume sterile filtration of non-aqueous fluids
• Small fermenter inlet and exhaust gas filtration

Nota de análisis

Gravimetric Extractables: in 70/30 % IPA/water

Otras notas

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer Steam Sterilization & Integrity Testing Procedures guide and first page of Visual Inspection Guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Información legal

AERVENT is a registered trademark of Merck KGaA, Darmstadt, Germany