Saltar al contenido
Merck
Todas las fotos(1)

Documentos

639303

Sigma-Aldrich

Indium tin oxide coated PET

surface resistivity 60 Ω/sq, L × W × thickness 1 ft × 1 ft × 5 mil, sheet

Sinónimos:

ITO-PET, Polyethylene terephthalate film, ITO coated

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Todas las fotos(1)

About This Item

Fórmula lineal:
In2O3 · (SnO2)x
MDL number:
MFCD00171662
UNSPSC Code:
32131014
PubChem Substance ID:
329759912
NACRES:
NA.23

form

sheet

Quality Level

100

surface resistivity

60 Ω/sq

L × W × thickness

1 ft × 1 ft × 5 mil

transmittance

550 nm, >78%

SMILES string

O=[In]O[In]=O.O=[Sn]=O

InChI

1S/2In.5O.Sn

InChI key

LNNWKAUHKIHCKO-UHFFFAOYSA-N

¿Está buscando productos similares? Visita Guía de comparación de productos

General description

Indium tin oxide films are inherently brittle in nature. To overcome this, ITO is coated with transparent conductive polymers or nanomaterial. Indium tin oxide coated polyethylene terephthalate (PET) film is optically transparent and electrically conductive.The ITO coating is protected by a thin, transparent film, that can be easily peeled off.

Application

A radius of curvature of up to 75 mm will not damage the ITO coating.
Micro mechanical properties of ITO-PET were investigated. Electrical resistance of ITO-PET increases in case of degradation. ITO-PET was used as an electrode in the electrochemical measurements in a study of biosensors composed of polymer brushes. ITO microelectrodes were studied as an “electronic tongue” for analyte recognition. The sheet resistance of ITO, after bending to a radius of 25 mm was investigated, for its use for flexible optical devices. Giant unilamellar vesicle (GUVs) were produced on ITO coated glass slides by drying droplets of the FhuA proteoliposomes.

Features and Benefits

The polyester film products comprise sputtered ITO, and exhibit transmittance and resistance characteristics similar to those of the glass substrates.

Physical properties

Thickness of ITO coating is 1300 Å

Quantity

5 ea = 5 x 1ft x 1ft

Storage Class

13 - Non Combustible Solids

wgk_germany

WGK 3

flash_point_f

Not applicable

flash_point_c

Not applicable

ppe

dust mask type N95 (US), Eyeshields, Gloves

Certificados de análisis (COA)

Busque Certificados de análisis (COA) introduciendo el número de lote del producto. Los números de lote se encuentran en la etiqueta del producto después de las palabras «Lot» o «Batch»

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Design of red, green, blue transparent electrodes for flexible optical devices
Kim S, et al.
Optics Express, 22(105), A1257-A1269 (2014)
Stimuli-Responsive Biointerface Based on Polymer Brushes for Glucose Detection
Crulhas BP, et al.
Electroanalysis, 26(4), 815-822 (2014)
A Novel Method to Couple Electrophysiological Measurements and Fluorescence Imaging of Suspended Lipid Membranes: The Example of T5 Bacteriophage DNA Ejection
Chiaruttini N, et al.
PLoS ONE, 8(12), 84376-84376 (2013)
Voltammetry of Micro-Liter Electrolyte Samples on ITO Microelectrodes for Analyte Recognition.
Jenabi A, et al.
Key Engineering Materials, 605, 601- 604 (2014)
Understanding the mechanisms that change the conductivity of damaged ITO-coated polymeric films: A micro-mechanical investigation
Saleh MN, et al.
Solar Energy Mat. and Solar Cells, 130, 199-207 (2014)
Ver todos los artículos relacionados

Artículos

Organic Semiconductor Laser Materials

In this article, we demonstrate that bis-styrylbenzene derivatives show promising characteristics for very low lasing thresholds and discuss the design considerations for organic lasing molecules.

Inverted Organic Photovoltaic Devices Using Zinc Oxide Nanocomposites as Electron Transporting Layer Materials

Organic photovoltaics (OPVs) represent a low-cost, lightweight, and scalable alternative to conventional solar cells. While significant progress has been made in the development of conventional bulk heterojunction cells, new approaches are required to achieve the performance and stability necessary to enable commercially successful OPVs.

Graphene-Based Transparent Conductive Electrodes

A transparent conductive electrode (TCE) is an essential component of various optoelectronic devices such as solar cells, liquid-crystal displays (LCD), light-emitting diodes (LED), and touch screens.

Graphene-Based Transparent Conductive Electrodes

A transparent conductive electrode (TCE) is an essential component of various optoelectronic devices such as solar cells, liquid-crystal displays (LCD), light-emitting diodes (LED), and touch screens.

Ver todo

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico