Saltar al contenido
Merck

571652

Sigma-Aldrich

Poly(9,9-di-n-octylfluorenyl-2,7-diyl)

light-emitting polymer

Sinónimos:

Fluorenyl polymer

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización


About This Item

Fórmula lineal:
C8H9(C29H40)nC8H9
Número MDL:
Código UNSPSC:
12352103
ID de la sustancia en PubChem:
NACRES:
NA.23

Nivel de calidad

Formulario

solid

mol peso

Mw ≥20000

solubilidad

chloroform: soluble

λmáx.

365 nm

fluorescencia

λex 374 nm; λem 417 nm in chloroform(lit.)

rendimiento de la unidad OLED

ITO/PEDOT:PSS/PVK/PFO/Ca

  • Color: blue
  • Max. Luminance: 102.3 Cd/m2
  • Max. EQE: 0.17 %

ITO/PEDOT:PSS/PVK/PFO:Ir(btpy)3 (5 wt%)/Ca
  • Color: red
  • Max. Luminance: 726.5 Cd/m2
  • Max. EQE: 2.32 %

ITO/PEDOT:PSS/PVK/PFO:Iridium (III) tris(2-(4-tolyl)pyridinato-N,C2) (5 wt%)/Ca
  • Color: green
  • Max. Luminance: 3311 Cd/m2
  • Max. EQE: 2.31 %

Mw/Mn

~3.7

¿Está buscando productos similares? Visita Guía de comparación de productos

Descripción general

Poly(9,9-di-n-octylfluorenyl-2,7-diyl) (PFO) is a blue light emitting fluorescent polymer with high electroluminescence quantum yield and chemical stability. It can form an emissive layer on the surface of the optoelectronic devices.

Aplicación

PFO can be used as a phase separated polymer that interacts with the conducting probes to define the effect of noise sources on σ-conjugated charge carriers. It is used to disperse single walled carbon nanotubes (SWCNTs), which can be further used in the fabrication of field-effect transistors (FETs).

Código de clase de almacenamiento

11 - Combustible Solids

Clase de riesgo para el agua (WGK)

WGK 3

Punto de inflamabilidad (°F)

Not applicable

Punto de inflamabilidad (°C)

Not applicable

Equipo de protección personal

Eyeshields, Gloves, type N95 (US)


Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

A novel electrochemiluminescent biosensor based on resonance energy transfer between poly (9, 9-di-n-octylfluorenyl-2, 7-diyl) and 3, 4, 9, 10-perylenetetracar-boxylic acid for insulin detection.
Zhang H, et al.
Biosensors And Bioelectronics, 104, 65-71 (2018)
High Performance Ambipolar Field-Effect Transistor of Random Network Carbon Nanotubes.
Bisri SZ, et al.
Advanced Materials, 24(46), 6147-6152 (2012)
Nanoscale direct mapping of localized and induced noise sources on conducting polymer films.
Shekhar S, et al.
Nanoscale, 8(2), 835-842 (2016)
Effectiveness of sorting single-walled carbon nanotubes by diameter using polyfluorene derivatives.
Gao, J, et al.
Carbon, 49(1), 333-338 (2011)
Red-green-blue polymer light-emitting diode pixels printed by optimized laser-induced forward transfer
Stewart, J. S.; et al.
Applied Physics Letters, 100, 203303-203303 (2012)

Artículos

LEPs enable a wide range of important applications including sensors, flexible LED displays and lighting devices, optical pump lasers, and potentially polymer diode lasers.

LEPs enable a wide range of important applications including sensors, flexible LED displays and lighting devices, optical pump lasers, and potentially polymer diode lasers.

LEPs enable a wide range of important applications including sensors, flexible LED displays and lighting devices, optical pump lasers, and potentially polymer diode lasers.

LEPs enable a wide range of important applications including sensors, flexible LED displays and lighting devices, optical pump lasers, and potentially polymer diode lasers.

Ver todo

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico