Saltar al contenido
Merck
Todas las fotos(2)

Documentos

357421

Sigma-Aldrich

Tungsten

powder, ≤10 μm, ≥99.99% trace metals basis

Sinónimos:

W

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Todas las fotos(2)

About This Item

Fórmula empírica (notación de Hill):
W
Número de CAS:
7440-33-7
Peso molecular:
183.84
EC Number:
231-143-9
MDL number:
MFCD00011461
UNSPSC Code:
12141747
PubChem Substance ID:
24861914
NACRES:
NA.23

Quality Level

100

assay

≥99.99% trace metals basis

form

powder

resistivity

4.9 μΩ-cm, 20°C

particle size

≤10 μm

bp

5660 °C (lit.)

mp

3410 °C (lit.)

density

19.3 g/mL at 25 °C (lit.)

SMILES string

[W]

InChI

1S/W

InChI key

WFKWXMTUELFFGS-UHFFFAOYSA-N

pictograms

Flame
GHS02

signalword

Warning

hcodes

H252

Hazard Classifications

Self-heat. 2

Storage Class

4.2 - Pyrophoric and self-heating hazardous materials

wgk_germany

WGK 3

flash_point_f

Not applicable

flash_point_c

Not applicable

ppe

dust mask type N95 (US), Eyeshields, Gloves, type P3 (EN 143) respirator cartridges

Certificados de análisis (COA)

Busque Certificados de análisis (COA) introduciendo el número de lote del producto. Los números de lote se encuentran en la etiqueta del producto después de las palabras «Lot» o «Batch»

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Los clientes también vieron

Slide 1 of 4

1 of 4

Tungsten powder, max. particle size 25 micron, weight 1000 g, purity 99.9%

GF37370752

Tungsten

Tungsten foil, thickness 0.5 mm, ≥99.9% trace metals basis

Sigma-Aldrich

357189

Tungsten

Tungsten(IV) carbide powder, 2 μm, ≥99%

Sigma-Aldrich

241881

Tungsten(IV) carbide

Tungsten wire, diam. 0.25 mm, ≥99.9% trace metals basis

Sigma-Aldrich

267554

Tungsten

Weijie Zhao et al.
ACS nano, 7(1), 791-797 (2012-12-22)
Geometrical confinement effect in exfoliated sheets of layered materials leads to significant evolution of energy dispersion in mono- to few-layer thickness regime. Molybdenum disulfide (MoS(2)) was recently found to exhibit indirect-to-direct gap transition when the thickness is reduced to a
Katrin Schröder et al.
Free radical biology & medicine, 41(9), 1353-1360 (2006-10-07)
Hyperlipidemia enhances xanthine oxidase (XO) activity. XO is an important source of reactive oxygen species (ROS). Since ROS are thought to promote atherosclerosis, we hypothesized that XO is involved in the development of atherosclerosis. ApoE(-/-) mice were fed a Western-type
Michael L Crichton et al.
Biomaterials, 34(8), 2087-2097 (2012-12-25)
The recent emergence of micro-devices for vaccine delivery into upper layers of the skin holds potential for increased immune responses using physical means to target abundant immune cell populations. A challenge in doing this has been a limited understanding of
Karel Deprez et al.
Medical physics, 40(1), 012501-012501 (2013-01-10)
The construction of complex collimators with a high number of oblique pinholes is very labor intensive, expensive or is sometimes impossible with the current available techniques (drilling, milling or electric discharge machining). All these techniques are subtractive: one starts from
Zhigang Chen et al.
Advanced materials (Deerfield Beach, Fla.), 25(14), 2095-2100 (2013-02-22)
A new photothermal coupling agent for photothermal ablation (PTA) therapy of tumors is developed based on ultrathin PEGylated W18O49 nanowires. After being injected with the nanowire solution, the in vivo tumors exhibit a rapid temperature rise to 50.0 ± 0.5
Ver todos los artículos relacionados

Artículos

Additive Manufacturing of Permanent Magnets

Permanent magnets are an essential technology for energy conversion. Motors and generators are used to convert energy between electrical and mechanical forms.

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico