1.50930

LiChrospher^® 100 RP-8 (5 µm) HPLC Columns

L x I.D. 25 mm x 4 mm, LiChroCART^™ HPLC cartridge, manuCART^™ holder required for use

• UNSPSC Code: 41115709
• NACRES: SB.52

Properties

• product name: LiChrospher^® 100 RP-8 (5 µm) LiChroCART^™ 25-4, suitable for HPLC
• material: stainless steel column
• Quality Level: 100
• Agency: suitable for USP L7
• product line: LiChrospher^®
• feature: endcapped: no
• extent of labeling: 12.5% Carbon loading
• parameter: 250 bar pressure; 60 °C max. temp.
• technique(s): HPLC: suitable; mass spectrometry (MS): suitable (Low - Medium)
• column L × I.D.: 2.5 cm × 4 mm
• surface area: 350 m²/g
• matrix: fully porous particle
• matrix active group: C8 bonding phase
• particle size: 5 μm
• pore size: 100 Å pore size
• operating pH range: 2-7.5
• separation technique: reversed phase
• storage temp.: no temp limit

Description

General description

HPLC cartridge

LiChrospher^® RP-8 is a reliable and versatile traditionally produced spherical silica gel carrier with C-8 reversed phase properties. It is well suited for the separation of neutral, acidic and weak basic compounds. This sorbent is packed into a LiChroCART 25-4 HPLC pre-cartridge, to be used in connection with LiChroCART HPLC cartridges, packed with LiChrospher Si 60 (5µm or 10µm). The connection is being accomplished by use of the LiChroCART coupling kit (1.50082).

Analysis Note

Pressure: ≤ 8 bar
Theoretical Plates (N/m) (1,2-Benzanthracene): ≥ 30000
Symmetry (1,2-Benzanthracene): 0.8 - 1.5
Capacity factor (1,2-Benzanthracene): ≥ 2.5

Legal Information

LICHROCART is a trademark of Merck KGaA, Darmstadt, Germany

LiChrospher is a registered trademark of Merck KGaA, Darmstadt, Germany