939374

Lithium acetate dihydrate

≥99.9% trace metals basis

• Synonyme(s) : Acetic acid lithium salt, Acetic acid lithium salt dihydrate
• Formule linéaire : CH₃COOLi · 2H₂O
• Numéro CAS: 6108-17-4
• Poids moléculaire : 102.02
• Numéro Beilstein : 3564320
• Numéro MDL: MFCD00066949

Propriétés

• Type: (High purity Salts)
• Niveau de qualité: 200
• Pureté: ≥99.9% trace metals basis
• Forme: powder or crystals; solid
• Impuretés: ≤1000 ppm (trace metals analysis)
• Couleur: white to off-white
• pH: ≤9.5
• Pf: 53-56 °C (lit.)
• Solubilité: water: soluble
• Traces d'anions: chloride (Cl^-): ≤20 ppm; sulfate (SO₄^2-): ≤50 ppm
• Traces de cations: Al: <100 ppm; Cu: <100 ppm; Fe: <100 ppm; K: <100 ppm; Mg: <100 ppm; Na: ≤50 ppm; Pb: <100 ppm; Zn: <100 ppm
• Application(s): battery manufacturing
• Chaîne SMILES: [Li+].[H]O[H].[H]O[H].CC([O-])=O
• InChI: 1S/C2H4O2.Li.2H2O/c1-2(3)4;;;/h1H3,(H,3,4);;2*1H2/q;+1;;/p-1
• Clé InChI: IAQLJCYTGRMXMA-UHFFFAOYSA-M

Description

Description générale

Lithium acetate dihydrate is a soluble white compound with a one-dimensional structure. Lithium acetate dihydrate has various applications in industries such as pharmaceuticals, ceramics, and research laboratories. It is often utilized as a source of lithium ions in chemical reactions and as a precursor in the synthesis of other lithium compounds.

Application

Lithium acetate dihydrate is a significant salt with a wide range of applications. It is utilized as a component in drug formulation and therapy, as a buffer for DNA and RNA gel electrophoresis, and as an additive or catalyst in textiles and polymer production. Additionally, it serves as a ferromagnetic nanoparticle, catalyst, and precursor material for batteries
Our Lithium acetate dihydrate, with a purity of 99.9% on a trace metals basis, serves as an excellent precursor for batteries and catalysis. Its low trace metals content and anions make it particularly well-suited for these applications.

• Lithium Iron Pyrophosphate (LiFe_1.5P₂O₇) with monoclinic structures was successfully synthesized using Lithium acetate dihydrate in combination with other metal acetates, in a ratio of Li/Fe/P = 1.05:1.5:2, through a wet-chemical method. Maintaining the appropriate lithium concentration is crucial to prevent stoichiometry loss in the final product. This material has found application as a positive electrode in Lithium-ion batteries. Remarkably, the electrode demonstrates excellent incremental capacity, indicating a stable structure during the initial cycle, with redox peaks observed at 3.33 and 3.22 V versus Li⁰/Li⁺
• LiMn₂O₄ films were synthesized on Au foil using the sol-gel and spin-coating techniques, employing Lithium acetate dihydrate and manganese acetate tetrahydrate in a Li/Mn ratio of 1.1/2. The particles used had an average size of approximately 300 nm. To investigate the morphological changes during over-discharging, the EC-HS-AFM technique was utilized. The images captured revealed the presence of wrinkle-like and step-like structures on the particle surface. These structures were attributed to stresses induced by structural distortion during the phase transformation from cubic (LiMn₂O₄) to tetragonal (Li₂Mn₂O₄). The formation of the Li₂Mn₂O₄ phase was confirmed through ex situ XRD analysis. Furthermore, by analyzing the EC-HS-AFM images, the particle surface area was quantitatively extracted as a function of potential, providing insights into the irreversible expansion/contraction behavior of the particles
• Cobalt-free cathodes, specifically Mg and Zr modified LiNi_0.5Mn_1.5O₄ (LNMO), were synthesized using Lithium acetate dihydrate and other metal acetates via a citric acid sol-gel method. The modifications aimed to improve the electrochemical performance of the cathode, particularly at high temperatures, by limiting Mn dissolution and adjusting interstitial sites. This modification resulted in increased stability of the cathode, extending the cycle life to 1000 cycles at both 25 and 50 °C

Caractéristiques et avantages

• Water soluble
• Medium purity (99.9%)
• Low trace metals in ppm level
• Cost effective
• Low Chloride and sulfate levels

Informations sur la sécurité

• Code de la classe de stockage: 11 - Combustible Solids
• Classe de danger pour l'eau (WGK): WGK 1
• Point d'éclair (°F): Not applicable
• Point d'éclair (°C): Not applicable