1.51353

LiChrosorb^® RP-8 (5 µm) HPLC Columns

L x I.D. 250 mm x 4 mm, LiChroCART^® HPLC cartridge, manuCART^™ holder required for use

• Synonym(s): TM=["LiChrosorb"] C8 TM=["LICHROCART"] cartridge for HPLC
• UNSPSC Code: 41115709
• NACRES: SB.52

Properties

• product name: LiChrosorb^® RP-8 (5 µm) LiChroCART^® 250-4, suitable for HPLC
• material: stainless steel column
• Quality Level: 100
• Agency: suitable for USP L7
• product line: LiChrosorb^®
• feature: endcapped: no
• parameter: 250 bar pressure; 60 °C max. temp.
• technique(s): HPLC: suitable; mass spectrometry (MS): suitable (Low)
• column L × I.D.: 25 cm × 4 mm
• matrix: fully porous particle
• matrix active group: C8 bonding phase
• particle size: 5 μm
• pore size: 100 Å pore size
• operating pH range: 2-7.5
• separation technique: reversed phase
• storage temp.: no temp limit

Description

General description

HPLC cartridge

LiChrosorb^® RP-8 is a reliable irregular shaped silica gel carriers with reversed phase properties. It is well suited for the separation of neutral, acidic and weak basic compounds. This sorbent is packed into a LiChroCART 250-4 PLC cartridge. The connection to the HPLC system is being accomplished by use of the manu-CART NT cartrige holder (1.51486).

Analysis Note

Pressure: ≤ 80 bar
Theoretical Plates (N/m) (toluene): ≥ 50000
Symmetry (toluene): 0.8 - 1.4
Capacity factor (toluene): 0.5 - 1.5

Legal Information

LICHROCART is a registered trademark of Merck KGaA, Darmstadt, Germany

LiChrosorb is a registered trademark of Merck KGaA, Darmstadt, Germany