FMLW02500

Filtre membrane en PTFE, dimension de pores de 5,0 μm

Fluoropore^®, filter diam. 25 mm, hydrophobic

• Synonyme(s) : Fluoropore Membrane Filter
• Code UNSPSC : 40161507
• Nomenclature NACRES : NB.24

Propriétés

• Matériaux: PTFE membrane; gridded filter; white filter
• Caractéristiques: hydrophobic
• Fabricant/nom de marque: Fluoropore^®
• Paramètres: 122 mL/min-cm² water flow rate; 130 °C max. temp.; 6 L/min-cm² air flow rate
• Diam. du filtre: 25 mm
• filter thickness: 150 μm
• Dimension de pores: 5.0 μm pore size; 85 % porosity
• Point de bulle: ≥0.48 bar, air with water at 23 °C

Description

Description générale

Unlike fibrous filter media that trap particles in their matrix, Fluoropore^® (hydrophobic PTFE) membranes collect particles on their surface, which make them ideal candidates for use in airborne particle monitoring applications. This surface collection provides better detection efficiencies and lower FWHM measurements. (FWHM is defined as the full width at half of the maximum height of the P0-218 peak obtained during sampling of room air.)

Choice of Pore Sizes:
Fluoropore membranes are available in 3 μm (FSLW) and 5 μm (FMLW) pore sizes - the smaller pore size provides low FWHM; the larger pore size has very low pressure drop and greater throughput capacity, which minimizes the number of filter changeouts.

Contrasting Backing Material:
The white backing of our FMLW filter is gridded to assist in identifying membrane orientation for the correct installation into sampling devices.

Caractéristiques et avantages

• High collection efficiency
• Extremely low pressure drop
• Higher throughput capacity
• Black backing ensures proper orientation

Informations légales

Fluoropore is a registered trademark of Merck KGaA, Darmstadt, Germany