561967
Poly(sodium 4-styrenesulfonate) solution
average Mw ~200,000, 30 wt. % in H2O
Synonyme(s) :
PSS, Poly(4-styrenesulfonic acid) sodium salt
Se connecterpour consulter vos tarifs contractuels et ceux de votre entreprise/organisme
About This Item
Formule linéaire :
(C8H7NaO3S)n
Numéro CAS:
Numéro MDL:
Code UNSPSC :
12162002
Nomenclature NACRES :
NA.23
Produits recommandés
Poids mol.
average Mw ~200,000
Niveau de qualité
Concentration
30 wt. % in H2O
Indice de réfraction
n20/D ~1.3961
pH
~6.4
Viscosité
~118 cP
Densité
1.1471 g/mL at 25 °C
InChI
1S/C8H8O3S/c1-2-7-3-5-8(6-4-7)12(9,10)11/h2-6H,1H2,(H,9,10,11)
Clé InChI
MAGFQRLKWCCTQJ-UHFFFAOYSA-N
Vous recherchez des produits similaires ? Visite Guide de comparaison des produits
Catégories apparentées
Description générale
Poly (Sodium 4-Styrenesulfonate) (PSS), a strong anionic polyelectrolyte, possesses a number of negative charges along its backbone chain. The ionic charges, in such electrolytes, are largely independent of the pH condition. PSS deposition exhibits layer by layer assembly. Alternate adsorption of polycations and polyanions by electrostatic attraction forms polyelectrolyte multilayers (PEMs). PSS-graphite oxide shows high performance of electric double layer capacitance compared to pristine graphite oxide on account of the layer by layer assembly. PSS coating on nanoparticles inhibit formation of agglomeration.
Application
- Stabilization of low-cost phase change materials for thermal energy storage applications: This study explores the potential of Poly(sodium 4-styrenesulfonate) in stabilizing low-cost phase change materials, enhancing thermal energy storage capabilities (DO Akamo et al., 2023).
- UPCONVERTING NANOPARTICLES FOR BIOSENSING AND BIOIMAGING: Research on Poly(sodium 4-styrenesulfonate) utilized in biosensing and bioimaging via upconverting nanoparticles, highlighting its applications in high-temperature bioanalytical settings (V ANDRIGO, 2023).
- Chain Dynamics in a Polyelectrolyte Solution Under Shear: A Rheological NMR Investigation: Examines the chain dynamics of Poly(sodium 4-styrenesulfonate) under shear, providing insights into its rheological behavior (S Bartosch et al., 2023).
- Molecular conformation of polyelectrolytes inside Layer-by-Layer assembled films: This research delves into the structural properties of Poly(sodium 4-styrenesulfonate) within multilayered assemblies, contributing to materials science (P Gutfreund et al., 2023).
- Colloidal nanomedicines with prolonged release of chloroquine based on interactions with aromatic polymers after mixing two liquids: from in silico simulation of : Discusses the development of colloidal nanomedicines using Poly(sodium 4-styrenesulfonate), showcasing prolonged drug release capabilities (MG Villamizar-Sarmiento et al., 2024).
Caractéristiques et avantages
Anionic polyelectrolyte
Code de la classe de stockage
12 - Non Combustible Liquids
Classe de danger pour l'eau (WGK)
WGK 2
Point d'éclair (°F)
Not applicable
Point d'éclair (°C)
Not applicable
Équipement de protection individuelle
Eyeshields, Gloves, multi-purpose combination respirator cartridge (US)
Certificats d'analyse (COA)
Recherchez un Certificats d'analyse (COA) en saisissant le numéro de lot du produit. Les numéros de lot figurent sur l'étiquette du produit après les mots "Lot" ou "Batch".
Déjà en possession de ce produit ?
Retrouvez la documentation relative aux produits que vous avez récemment achetés dans la Bibliothèque de documents.
Les clients ont également consulté
Yu-Fen Huang et al.
Langmuir : the ACS journal of surfaces and colloids, 23(25), 12777-12781 (2007-11-02)
In this article, we report a simple approach for selectively sensing Fe2+ ions using CTAB-stabilized Au-Ag nanorods (CTAB-Au-Ag NRs) in the presence of poly(sodium 4-styrenesulfonate) (PSS). The prepared CTAB-Au-Ag NRs exhibit an intense longitudinal surface plasmon resonance absorption (>10(9) M(-1)
Lulu Han et al.
Langmuir : the ACS journal of surfaces and colloids, 28(1), 193-199 (2011-11-29)
Poly(sodium 4-styrenesulfonate) (PSS)/poly(diallyldimethylammonium chloride) (PDADMAC) multilayers were treated with 1-5 M NaCl solutions, resulting in continuous changes in the physicochemical properties of the multilayers. Significant mass loss was observed when the salt concentration was higher than 2 M and reached
Thidarat Angwarawong et al.
Dental materials journal, 30(2), 158-169 (2011-03-23)
Polyelectrolyte multilayer (PEM) film can modify the surface properties of materials to improve cellular responses. In this study poly(diallyldimethylammonium chloride) (PDADMAC), poly(sodium 4-styrene sulfonate) (PSS) and poly(4-styrenesulfonic acid-co-maleic acid) sodium salt (PSS-co-MA) were assembled into PEM {(PDADMAC/PSS)(4)/PDADMAC+PSS-co-MA} film on glass
Hae-Kyung Jeong et al.
ACS nano, 4(2), 1162-1166 (2010-01-27)
We propose a new material for high power and high density supercapacitors with excellent cycle stability. Graphite oxide (PSS-GO) intercalated with poly(sodium 4-styrensulfonate) showed high performance of electric double layer capacitance (EDLC) compared to that of the pristine graphite oxide.
Stable aqueous dispersions of graphitic nanoplatelets via the reduction of exfoliated graphite oxide in the presence of poly (sodium 4-styrenesulfonate).
Stankovich S, et al
Journal of Materials Chemistry, 16(2), 155-158 (2006)
Articles
We present an article that discusses two applications in particular; first, using these layers as polyelectrolyte membranes to control permeability.
Notre équipe de scientifiques dispose d'une expérience dans tous les secteurs de la recherche, notamment en sciences de la vie, science des matériaux, synthèse chimique, chromatographie, analyse et dans de nombreux autres domaines..
Contacter notre Service technique