Accéder au contenu
Merck
Toutes les photos(1)

Principaux documents

Voir toute la documentation

440345

Supelco

Glass spheres

Se connecterpour consulter vos tarifs contractuels et ceux de votre entreprise/organisme

Sélectionner une taille de conditionnement

100 G
50,90 €
500 G
166,00 €

50,90 €

Disponible pour expédition le18 avril 2025Détails

Devis pour commande en gros
Toutes les photos(1)

Sélectionner une taille de conditionnement

Changer de vue
100 G
50,90 €
500 G
166,00 €

About This Item

Formule empirique (notation de Hill) :
O2Si
Numéro CAS:
65997-17-3
Poids moléculaire :
60.08
Numéro CE :
266-046-0
Numéro MDL:
MFCD00147032
Code UNSPSC :
23201100
ID de substance PubChem :
24867590
Nomenclature NACRES :
SB.52

50,90 €

Disponible pour expédition le18 avril 2025Détails

Devis pour commande en gros

Qualité

high-purity grade

Niveau de qualité

100

Forme

powder

Technique(s)

LPLC: suitable

Superficie

125 m2/g

Matrice

Silica

Groupe de la matrice active

silica

Taille moyenne des particules

9-13 μm

Densité

1.1 g/mL at 25 °C (lit.)

Adéquation

suitable for acidity or alkalinity (alkalinity < 0.5 meq/g ASTM D 3100)

Chaîne SMILES 

O=[Si]=O

InChI

1S/O2Si/c1-3-2

Clé InChI

VYPSYNLAJGMNEJ-UHFFFAOYSA-N

Vous recherchez des produits similaires ? Visite Guide de comparaison des produits

Catégories apparentées

Description générale

Silica is a naturally occurring material in minerals, flint and in some plants in crystalline phase. Silica used in industries is in synthetic form. Surface area, pore volume, pore size and particle size are independently controllable to some extent. The crystalline silica may be classified based on atmospheric pressure as:
a. Quartz = 1143K
b. Tridymite 1143 - 1743K
c. Cristobalite = 1743, over 1973K it forms amorphous vitreous silica glass.[1]

Application

Low density filler for coatings and plastics.
Silica glass spheres are low density filler for coatings and plastics. Silica was used in synthesis of silicalite.[2] Silica was also used to assist the catalytic growth of oxide and nitride nanowires.[3]

Caractéristiques et avantages

Light weight, crush-resistant filler. Imparts dimensional stability, reduces warpage, reduces plastic melt viscosity and provides multidirectional orientation in reinforced composites.

Forme physique

Hollow, spherical non-porous glass beads.

Code de la classe de stockage

11 - Combustible Solids

Classe de danger pour l'eau (WGK)

WGK 1

Point d'éclair (°F)

Not applicable

Point d'éclair (°C)

Not applicable

Équipement de protection individuelle

Eyeshields, Gloves, type P3 (EN 143) respirator cartridges

Faites votre choix parmi les versions les plus récentes :

Certificats d'analyse (COA)

Lot/Batch Number
0000379889
0000379889
MKCV8794
MKCV8793
MKCT0930

Vous ne trouvez pas la bonne version ?

Si vous avez besoin d'une version particulière, vous pouvez rechercher un certificat spécifique par le numéro de lot.

Rechercher un(e) COA

Déjà en possession de ce produit ?

Retrouvez la documentation relative aux produits que vous avez récemment achetés dans la Bibliothèque de documents.

Consulter la Bibliothèque de documents

Les clients ont également consulté

Slide 1 of 2

1 of 2

Sigma-Aldrich

Sigma-Aldrich

G9018

Glass beads, unwashed

Glass beads, acid-washed 212-300&#160;&#956;m (50-70 U.S. sieve)

Sigma-Aldrich

G1277

Glass beads, acid-washed

Norma A Sánchez-Flores et al.
Journal of colloid and interface science, 323(2), 359-364 (2008-05-27)
Well crystallized silicalite-1 has been obtained from three sources of amorphous silica, namely, rice hull ashes, commercial Davisil, and a fume silica from Aldrich. The silicas were first dissolved in glycerol according to a recently described reaction. This reaction transforms
The Heat Capacities of Quartz, Cristobalite and Tridymite at Low Temperatures
Anderson, C. Travis.
Journal of the American Chemical Society, 58, 568-570 (1936)
Silica-assisted catalytic growth of oxide and nitride nanowires.
Tang, C. C., et al.
Chemical Physics Letters, 333, 12-15 (2001)
Keren B Turton et al.
PloS one, 10(5), e0127243-e0127243 (2015-05-20)
Signal transducer and activator of transcription 3 (STAT3) is a key mediator of leukocyte differentiation and proliferation. The 3' end of STAT3 transcripts is subject to two alternative splicing events. One results in either full-length STAT3α or in STAT3β, which
Yijun Yao et al.
Journal of hazardous materials, 298, 221-231 (2015-06-10)
In 2002, U.S. EPA proposed a general buffer zone of approximately 100 feet (30 m) laterally to determine which buildings to include in vapor intrusion (VI) investigations. However, this screening distance can be threatened by factors such as extensive surface
Afficher tous les articles scientifiques apparentés

Questions

1–2 sur 2 questions  

  1. How can I determine the shelf life / expiration / retest date of this product?

    1 réponse

    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      Utile ?

  2. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 réponse

    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      Utile ?

Évaluations

Aucune valeur de notation

Filtres actifs

Notre équipe de scientifiques dispose d'une expérience dans tous les secteurs de la recherche, notamment en sciences de la vie, science des matériaux, synthèse chimique, chromatographie, analyse et dans de nombreux autres domaines..

Contacter notre Service technique