•The replacement part for a MPGL04GK2 is item number MPGL04001, which is the non-sterilized version of this filter.
• Apart from this, there does not seem to be a direct replacement.
• Note that MPGL04001 is autoclavable and can withstand up to 3 cycles of autoclaving for 90 minutes at 123°C.
MPGL04GK2
Millipak® Gold Filter
Sterile 0.22 μm membrane filter for particulate-free and bacteria-free water at the point of dispense, For use with Alpha-Q, Milli-DI® and Milli-Q® Academic / Biocel / Element / Synthesis / Plus / Gradient systems
Synonym(s):
Millipak® 40 Gamma Gold Filter
Sign Into View Organizational & Contract Pricing
Select a Size
2 EA
€364.00
All Photos(1)
Select a Size
Change View
2 EA
€364.00
About This Item
UNSPSC Code:
41104212
eCl@ss:
33050190
NACRES:
JA.14
Recommended Products
material
PVDF membrane
Quality Level
sterility
sterile
product line
EMPROVE® Filter
feature
hydrophilic
packaging
pkg of 2 units
manufacturer/tradename
Millipak®
parameter
0.35 bar max. differential pressure at 123 °C (Forward)
0.7 bar max. differential pressure at 25 °C (Reverse)
1.7 bar max. differential pressure at 80 °C (Forward)
4.1 bar max. differential pressure at 25 °C (Forward)
5.2 bar max. inlet pressure at 25 °C
inlet connection diam.
1/4 in.
outlet connection diam.
1/4 in.
impurities
<0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
gravimetric extractables
≤1.5 mg/device
matrix
Durapore®
pore size
0.22 μm pore size
fitting
male NPT inlet connection
outlet stepped hose barb (with bell)
compatibility
for use with Alpha-Q
for use with Milli-DI®
for use with Milli-Q® Academic
for use with Milli-Q® Biocel
for use with Milli-Q® Direct
for use with Milli-Q® Element
for use with Milli-Q® Gradient
for use with Milli-Q® Plus
for use with Milli-Q® Reference
for use with Milli-Q® Synthesis
shipped in
ambient
Looking for similar products? Visit Product Comparison Guide
General description
Millipak® membrane products are designed for routine filtration applications in the laboratory. Millipak® filters are best-in-class proven products, used in lab water purification systems to provide particulate-free and bacteria-free water to benefit the stringent requirements of scientific applications.
Application
Provides bacteria- and particulate-free water suitable for techniques used in the laboratory where bacteria control is crucial (cell culture, microbiology media preparation, etc.).
Features and Benefits
- Millipak® membrane filters are made with Durapore® PVDF membranes to provide high flow rates and throughputs, low extractable and broad chemical compatibility.
- Gamma-irradiated for additional bacteria control.
- The membrane is supported by a rigid plastic disc with channels that ensures high water flow and resistance to pressure variations without the risk of membrane rupture.
- Millipak® membrane filters use the unique, clean stacked disc design, allowing minimal hold-up volume and particle shedding.
- Connects to the outlet of the water delivery point, such as the PODs of Milli-Q® water purification systems.The protective bell protects against intrusion of airborne bacteria contamination during dispensing.
- The protective bell protects against intrusion of airborne bacteria contamination during dispensing.
- Care-free maintenance: the filter is easily fitted and replaced.
- Device configuration: Gamma Gold Capsule.
- Sterile unit.
- Delivered hermetically sealed, with its Certificate of Quality.
Other Notes
These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Directions for Use
- Organism Retention: Microorganisms
- Mode of Action: Filtering
- Application: General laboratory analysis
- Intended Use: Water purification
- Instructions for Use: This item provides water filtered through 0.22 μm sterilizing-grade membranes. Refer to system equipment user guide section "Using the System" (available on USB key in the system box).
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Preparation Note
This product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
Analysis Note
Bacterial Retention
Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
Gravimetric Extractables: using sterilized device after a 200 mL flush and 24 hours in water at controlled room temperature
Legal Information
ASTM is a registered trademark of American Society for Testing and Materials
Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany
Emprove is a registered trademark of Merck KGaA, Darmstadt, Germany
MILLI-DI is a registered trademark of Merck KGaA, Darmstadt, Germany
MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany
Milli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Customers Also Viewed
-
Is there an alternative to MPGL04GK2? We change filters every 3 months.
1 answer-
Helpful?
-
Active Filters
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service
