Saltar al contenido
Merck

Optimization of supercritical fluid consecutive extractions of fatty acids and polyphenols from Vitis vinifera grape wastes.

Journal of food science (2014-12-05)
Oier Aizpurua-Olaizola, Markel Ormazabal, Asier Vallejo, Maitane Olivares, Patricia Navarro, Nestor Etxebarria, Aresatz Usobiaga
RESUMEN

In this study, supercritical fluid extraction has been successfully applied to a sequential fractionation of fatty acids and polyphenols from wine wastes (2 different vitis vinifera grapes). To this aim, in a 1st step just fatty acids were extracted and in a 2nd one the polyphenols. The variables that affected to the extraction efficiency were separately optimized in both steps following an experimental design approach. The effect of extraction temperature flow, pressure, and time were thoroughly evaluated for the extraction of fatty acids, whereas the addition of methanol was also considered in the case of the polyphenols extraction. A quantitative extraction with high efficiency was achieved at a very short time and low temperatures. Concerning quantification, fatty acids were determined by means of gas chromatography coupled to mass spectrometry after a derivatization step, whereas the polyphenols were analyzed by means of high performance liquid chromatography coupled to tandem mass spectrometry and the Folin-Ciocalteu method.

MATERIALES
Referencia del producto
Marca
Descripción del producto

Sigma-Aldrich
Ácido sulfúrico, ACS reagent, 95.0-98.0%
Sigma-Aldrich
Hidróxido de sodio, ACS reagent, ≥97.0%, pellets
Sigma-Aldrich
Hidróxido de sodio, reagent grade, ≥98%, pellets (anhydrous)
Sigma-Aldrich
Ácido fórmico, reagent grade, ≥95%
Sigma-Aldrich
Hidróxido de sodio solution, 50% in H2O
Sigma-Aldrich
Carbonato de sodio, powder, ≥99.5%, ACS reagent
Sigma-Aldrich
Ácido fórmico, ACS reagent, ≥96%
Sigma-Aldrich
Carbonato de sodio, ACS reagent, anhydrous, ≥99.5%, powder or granules
Sigma-Aldrich
Hidróxido de sodio solution, BioUltra, for molecular biology, 10 M in H2O
Sigma-Aldrich
Ácido sulfúrico, 99.999%
Sigma-Aldrich
Hidróxido de sodio solution, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
Hidróxido de sodio, BioXtra, ≥98% (acidimetric), pellets (anhydrous)
Sigma-Aldrich
2,2,4-Trimetilpentano, ACS reagent, ≥99.0%
Sigma-Aldrich
Metil cis-11-eicosenoato, ≥98%
Sigma-Aldrich
Hidróxido de sodio, reagent grade, 97%, powder
Sigma-Aldrich
Hidróxido de sodio, puriss., meets analytical specification of Ph. Eur., BP, NF, E524, 98-100.5%, pellets
Sigma-Aldrich
Carbonato de sodio, ACS reagent (primary standard), anhydrous, 99.95-100.05% dry basis
Sigma-Aldrich
Ácido fórmico, ACS reagent, ≥88%
Sigma-Aldrich
2,2,4-Trimetilpentano, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.5%
Sigma-Aldrich
Ácido gálico, 97.5-102.5% (titration)
Sigma-Aldrich
Hidróxido de sodio, pellets, semiconductor grade, 99.99% trace metals basis
Sigma-Aldrich
Carbonato de sodio, ReagentPlus®, ≥99.5%
Sigma-Aldrich
Hidróxido de sodio solution, 5.0 M
Sigma-Aldrich
Methyl oleate, 99%
Sigma-Aldrich
Methyl stearate, ~99% (GC)
Sigma-Aldrich
Methyl palmitate, ≥99% (capillary GC)
Sigma-Aldrich
Carbonato de sodio, anhydrous, powder, 99.999% trace metals basis
Sigma-Aldrich
Methyl laurate, 99.5%
Sigma-Aldrich
Hidróxido de sodio, beads, 16-60 mesh, reagent grade, 97%
Sigma-Aldrich
Methyl myristate, ≥99% (GC)