Saltar al contenido
Merck

Predicting both passive intestinal absorption and the dissociation constant toward albumin using the PAMPA technique.

European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences (2014-07-11)
Alban Bujard, Marine Sol, Pierre-Alain Carrupt, Sophie Martel
RESUMEN

The parallel artificial membrane permeability assay (PAMPA) is a high-throughput screening (HTS) method that is widely used to predict in vivo passive permeability through biological barriers, such as the skin, the blood brain barrier (BBB) and the gastrointestinal tract (GIT). The PAMPA technique has also been used to predict the dissociation constant (Kd) between a compound and human serum albumin (HSA) while disregarding passive permeability. Furthermore, the assay is based on the use of two separate 5-point kinetic experiments, which increases the analysis time. In the present study, we adapted the hexadecane membrane (HDM)-PAMPA assay to both predict passive gastrointestinal absorption via the permeability coefficient logPe value and determine the Kd. Two assays were performed: one in the presence and one in the absence of HSA in the acceptor compartment. In the absence of HSA, logPe values were determined after a 4-h incubation time, as originally described, but the dimethylsulfoxide (DMSO) percentage and pH were altered to be compatible with the protein. In parallel, a second PAMPA assay was performed in the presence of HSA during a 16-h incubation period. By adding HSA, a variation in the amount of compound crossing the membrane was observed compared to the permeability measured in the absence of HSA. The concentration of compound reaching the acceptor compartment in each case was used to determine both parameters (logPe and logKd) using numerical simulations, which highlighted the originality of this method because these calculations required only two endpoint measurements instead of a complete kinetic study. It should be noted that the amount of compound that reaches the acceptor compartment in the presence of HSA is modulated by complex dissociation in the receptor compartment. Only compounds that are moderately bound to albumin (-3<logKd [M]<-6) can be measured using this method. If compound permeability through the artificial membrane is low in the absence of HSA, the impact of complex formation/dissociation cannot be detected, and thus, logKd cannot be determined for this class of compounds. Thirteen compounds with known Kd values were analyzed using this method, and the obtained Kd values were in agreement with those obtained using primarily the gold-standard equilibrium dialysis. A linear correlation with a determination coefficient (r(2)) equal to 0.88 was obtained. This assay utilizes a technique that is currently routinely used in industrial companies to obtain permeability measurements; moreover, this approach is fast (96-well plate format), economical and easy to handle. This assay uses protein freely in solution, which may be more relevant than embedded proteins in chromatographic systems, for example. Finally, this method can be adapted to numerous other highly stable proteins.

MATERIALES
Referencia del producto
Marca
Descripción del producto

Sigma-Aldrich
Dimetilsulfóxido, Hybri-Max, sterile-filtered, BioReagent, suitable for hybridoma, ≥99.7%
Sigma-Aldrich
Dimetilsulfóxido, ACS reagent, ≥99.9%
Sigma-Aldrich
Dimetilsulfóxido, for molecular biology
Sigma-Aldrich
Fosfato de potasio monobasic, ACS reagent, ≥99.0%
Sigma-Aldrich
Dimetilsulfóxido, suitable for HPLC, ≥99.7%
Sigma-Aldrich
Dimetilsulfóxido, sterile-filtered, BioPerformance Certified, meets EP, USP testing specifications, suitable for hybridoma
Sigma-Aldrich
Fosfato de sodio dibasic, ACS reagent, ≥99.0%
Sigma-Aldrich
Dimetilsulfóxido, ReagentPlus®, ≥99.5%
Sigma-Aldrich
Hexano, ReagentPlus®, ≥99%
Sigma-Aldrich
Hexano, suitable for HPLC, ≥95%
Sigma-Aldrich
Dimetilsulfóxido, ≥99.5% (GC), suitable for plant cell culture
Sigma-Aldrich
Fosfato de sodio dibasic, puriss. p.a., ACS reagent, anhydrous, ≥99.0% (T)
Sigma-Aldrich
Fosfato de potasio monobasic, powder, suitable for cell culture, suitable for insect cell culture, suitable for plant cell culture, ≥99.0%
Sigma-Aldrich
Hexano, Laboratory Reagent, ≥95%
Sigma-Aldrich
Hexano, HPLC Plus, for HPLC, GC, and residue analysis, ≥95%
Sigma-Aldrich
Fosfato de sodio dibasic, puriss., meets analytical specification of Ph. Eur., BP, USP, FCC, E 339, anhydrous, 98-100.5% (calc. to the dried substance)
Sigma-Aldrich
Dimetilsulfóxido, BioUltra, for molecular biology, ≥99.5% (GC)
Sigma-Aldrich
Fosfato de potasio monobasic, for molecular biology, ≥98.0%
Sigma-Aldrich
Fosfato de sodio dibasic, BioReagent, suitable for cell culture, suitable for insect cell culture, ≥99.0%
Sigma-Aldrich
Fosfato de sodio dibasic, for molecular biology, ≥98.5% (titration)
Sigma-Aldrich
Sodium phosphate dibasic solution, BioUltra, 0.5 M in H2O
Sigma-Aldrich
Dimetilsulfóxido, PCR Reagent
Sigma-Aldrich
Fosfato de sodio dibasic, 99.95% trace metals basis
Sigma-Aldrich
Fosfato de potasio monobasic, BioUltra, for molecular biology, anhydrous, ≥99.5% (T)
Sigma-Aldrich
Fosfato de sodio dibasic, BioUltra, for molecular biology, ≥99.5% (T)
Sigma-Aldrich
Hexadecane, ReagentPlus®, 99%
Sigma-Aldrich
Fosfato de sodio dibasic, ReagentPlus®, ≥99.0%
Sigma-Aldrich
Fosfato de potasio monobasic, ReagentPlus®
USP
Dimetilsulfóxido, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
Fosfato de potasio monobasic, 99.99% trace metals basis