SGW1A47FH3

Polysep^™ II 1.0/0.2/0.1 µm nominal, OptiScale^® Capsule

OptiScale^® 47, filtration area 17.7 cm², pore size 1.0/0.2/0.1 μm

• Sinónimos: Optiscale Capsule Polysep II 1.0/0.2/0.1 μm 3/4 in. TC-1/4 in. HB
• Código UNSPSC: 23151806
• eCl@ss: 32031690

Propiedades

• Materiales: PVDF vent cap; borosilicate glass fiber (BGF) membrane; fluoroelastomer FKM seal; mixed cellulose esters (MCE) membrane; polycarbonate ; polypropylene support
• Nivel de calidad: 400
• cumplimiento norm.: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
• esterilidad: non-sterile
• Compatibilidad de esterilización: autoclavable compatible
• Línea del producto: OptiScale^® 47
• Características: hydrophilic
• fabricante / nombre comercial: OptiScale^®
• Parámetros: 25 °C max. inlet temp.; 5.5 bar max. inlet pressure (80 psi) at 25 °C; 80 psig max. inlet pressure
• técnicas: prefiltration: suitable
• Diámetro: 6.9 cm (2.7 in.)
• filtración área: 17.7 cm²
• diám. conexión a entrada: 3/4 in.
• diám. conexión a salida: 1/4 in.
• impurezas: ≤0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
• matriz: Polysep^™ II
• pore size: 1.0/0.2/0.1 μm nominal pore size; 1.0/0.2/0.1 μm pore size
• entrada: sample type liquid
• Adaptador: inlet sanitary flange; outlet hose barb; (19 mm (3/4 in.) Sanitary Flange Inlet and 6 mm (1/4 in.) Hose Barb Outlet)

Descripción

Descripción general

Device Configuration: Capsule

Características y beneficios

Format: Triple Layer

Otras notas

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Directions for Use

• Organism Retention: Bacterial
• Mode of Action: Filtration (size exclusion)
• Application: Protein purification
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer installation and wetting sections of OPTISCALE^®-25 user guide
• Storage Statement: Please refer OPTISCALE^®-25 user guide
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Nota de preparación

Sterilization Method
3 autoclave cycles of 60 min @ 121 °C

Nota de análisis

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥100 mL

Información legal

OptiScale is a registered trademark of Merck KGaA, Darmstadt, Germany

Polysep is a trademark of Sigma-Aldrich Co. LLC

Información de seguridad

• Pictogramas: GHS08
• Palabra de señalización: Danger
• Frases de peligro: H350i
• Consejos de prudencia: P201 - P202 - P280 - P308 + P313 - P405 - P501
• Clasificaciones de peligro: Carc. 1B Inhalation
• Código de clase de almacenamiento: 4.1B - Flammable solid hazardous materials
• Clase de riesgo para el agua (WGK): WGK 2