D030F1P01

Cartucho de filtración Clarigard^®

pore size 3.0 μm, cartridge nominal length 10 in. (25 cm), Code F (double open end w/flat gaskets)

• Sinónimos: Clarigard Cartridge Filter 10 in. 3.0 μm Code F PE
• Código UNSPSC: 23151806
• eCl@ss: 32031690

Propiedades

• Materiales: polyethylene seal; polypropylene
• Nivel de calidad: 400
• Características: hydrophilic
• fabricante / nombre comercial: Clarigard^®; Clarigard^®
• Parámetros: 4.8 bar max. differential pressure (70 psid) at 25 °C; 4.8 bar max. inlet pressure (70 psi) at 25 °C
• longitud nominal del cartucho: 10 in. (25 cm)
• Diámetro: 6.7 cm (2.6 in.)
• impurezas: ≤0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
• extraíbles gravimétricos: ≤10 mg
• tamaño de poro: 3.0 μm nominal pore size; 3.0 μm pore size
• entrada: sample type liquid
• código del cartucho: Code F (double open end w/flat gaskets)

Descripción

Descripción general

Device Configuration: Cartridge

Nota de preparación

Sterilization Method
10 autoclave cycles or SIP @ 126 °C for 30 min

Nota de análisis

Gravimetric Extractables: after 24-h soak in water

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥3 L

Otras notas

Directions for Use

• Organism Retention: 99.99% retention
• Mode of Action: Filtration (nominal)
• Application: BioProcessing
• Intended Use: Bioburden reduction
• Instructions for Use: Please refer to the Polygard^® and Clarigard^® Cartridges user guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Información legal

CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany