D00572S01

Cartucho de filtración Clarigard^®

pore size 0.5 μm, cartridge nominal length 20 in. (50 cm), filter diam. 2.75 in. (7 cm), Code 7

• Código UNSPSC: 23151806

Propiedades

• Materiales: polypropylene filter; silicone seal
• Nivel de calidad: 400
• Características: hydrophilic
• fabricante / nombre comercial: Clarigard^®
• Parámetros: 4.8 bar max. differential pressure (70 psid) at 25 °C; 4.8 bar max. inlet pressure (70 psi) at 25 °C
• longitud nominal del cartucho: 20 in. (50 cm)
• diám. del filtro: 2.75 in. (7 cm)
• impurezas: ≤0.25 EU/mL bacterial endotoxins (LAL test, aqueous extraction)
• tamaño de poro: 0.5 μm pore size
• código del cartucho: Code 7

Descripción

Descripción general

Cartridge Type: Liquid

Clarigard^® filters′ 99.99% retention rating characteristic makes them ideal for the protection of critical downstream process steps such as membrane filters or chromatography columns. The graded-density depth structure of Clarigard^® filter media provides maximum filtration capacity, and the all-polypropylene construction offers low extractables levels and broad chemical compatibility.

Device Configuration: Cartridge

Nota de preparación

Sterilization Method:
10 autoclave cycles or SIP at 126°C for 30min

Nota de análisis

Gravimetric Extractables: ≤ 20mg after 24-h soak in water

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥6L

Otras notas

Directions for Use:

• Organism Retention: 99.99% retention
• Mode of Action: Filtration (nominal)
• Application: BioProcessing
• Intended Use: Bioburden reduction
• Instructions for Use: Please refer to the Polygard^® and Clarigard^® Cartridges user guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations

Información legal

CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany