CP1503SB1

Bevigard^™-L Cartridge Filter

pore size 1.0 μm, cartridge nominal length 30 in. (75 cm), Code 0 (2-222; O-rings)

• Sinónimos: Bevigard^™-L Cartridge Filter 30 in. 1.0 μm Code 0
• Código UNSPSC: 23151806
• eCl@ss: 32031610

Propiedades

• Materiales: borosilicate glass fiber (BGF) ; polypropylene ; polypropylene support; silicone seal
• cumplimiento norm.: meets EU framework regulation [1935/2004/EC] (all component materials; regarding materials and articles intended to contact food); meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
• fabricante / nombre comercial: Bevigard^™
• Parámetros: 3.5 bar max. differential pressure (50 psid) at 25 °C
• longitud nominal del cartucho: 30 in. (75 cm)
• Diámetro: 7.4 cm (2.9 in.)
• filtración área: 1.38 m²
• impurezas: ≤1.0 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
• extraíbles gravimétricos: ≤750 mg/cartridge
• Matriz: Bevigard^™-L
• tamaño de poro: 1.0 μm nominal pore size; 1.0 μm pore size
• entrada: sample type wine; sample type beer; sample type liquid; sample type beverage(s); sample type food(s); sample type bottled water
• código del cartucho: Code 0 (2-222; O-rings)

Descripción

Descripción general

Device Configuration: Cartridge

Características y beneficios

Format: Single Layer

Envase

Double Easy-Open bag

Otras notas

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Directions for Use:

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer to installation and wetting sections of OptiScale^®-25 user guide and introduction section of Mixed celulose esters Tech Brief
• Storage Statement: Please refer Mixed cellulose esters Tech Brief
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Especificaciones

Filter Grade: AP15

Nota de preparación

Sanitization Protocol
30 min with hot water @ 80 °C

Sterilization Method
10 autoclave cycles or SIP @ 121 °C for 30 min

Nota de análisis

Gravimetric Extractables: after 24 hours in water at controlled room temperature

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥5 L

Información legal

Bevigard is a trademark of Merck KGaA, Darmstadt, Germany

OptiScale is a registered trademark of Merck KGaA, Darmstadt, Germany