344289
Freund′s Complete Adjuvant, Modified, Mycobacterium butyricum
This Freund’s Complete Adjuvant, Modified, Mycobacterium butyricum is validated for use in Immunization.
Sinónimos:
Freund’s Complete Adjuvant, Modified, Mycobacterium butyricum
Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
About This Item
Productos recomendados
Nivel de calidad
formulario
liquid
fabricante / nombre comercial
Calbiochem®
condiciones de almacenamiento
OK to freeze
color
clear to slightly cloudy amber
Condiciones de envío
ambient
temp. de almacenamiento
2-8°C
Descripción general
1 Set (10 x 10 ml) each containing yellow, oily, bacterial suspension.
Contains 10 vials per set, each containing 10 ml of Freund′s complete adjuvant homogenized in the following proportions by weight: 85% Drakeol 5NF, 15% Arlacel A (mannide monooleate emulsifier), and 0.1% Mycobacterium butyricum dry cells.
Aplicación
Immunization
Advertencia
Toxicity: Standard Handling (A)
Forma física
Yellow, oily, bacterial suspension.
Otras notas
Composition
The Freund′s Adjuvant set contains 10 identical ampules, each with 10 ml of Freund′s Complete Adjuvant homogenized in the following preparations by weight:
85% Drakeol 5 NF
15% Arlacel A, mannide monooleate emulsifier
0.1% Mycobacterium butyricum dry cells
Sample Preparation
1. Withdraw contents of ampule using a 10 ml syringe with a 1 inch 21 guage needle. Add to a 50 ml vial, preferably with a narrow neck.
2. Dissolve 50 mg of antigen in 5 ml sterile PBS, pH 7.0-7.3. Maintain or create sterility if at all feasible. Draw the solution into the syringe.
3. Insert needle into adjuvant vial and forcibly drive solution into the vial. Withdraw about half the mixture into syringe and force it into the adjuvant vial again.
4.Repeat the mixing procedure in step 4 until a smooth, stable, milky, water-in-oil emulsion forms. Mixture may seem to thicken as the emulsion forms. Check if the emulsion is complete by expelling a drop from the syringe onto the water surface in a beaker. If the drop remains on the surface and does not disperse when the beaker is agitated slightly, the emulsion is adequate. A properly prepared emulsion is stable for days.
The Freund′s Adjuvant set contains 10 identical ampules, each with 10 ml of Freund′s Complete Adjuvant homogenized in the following preparations by weight:
85% Drakeol 5 NF
15% Arlacel A, mannide monooleate emulsifier
0.1% Mycobacterium butyricum dry cells
Sample Preparation
1. Withdraw contents of ampule using a 10 ml syringe with a 1 inch 21 guage needle. Add to a 50 ml vial, preferably with a narrow neck.
2. Dissolve 50 mg of antigen in 5 ml sterile PBS, pH 7.0-7.3. Maintain or create sterility if at all feasible. Draw the solution into the syringe.
3. Insert needle into adjuvant vial and forcibly drive solution into the vial. Withdraw about half the mixture into syringe and force it into the adjuvant vial again.
4.Repeat the mixing procedure in step 4 until a smooth, stable, milky, water-in-oil emulsion forms. Mixture may seem to thicken as the emulsion forms. Check if the emulsion is complete by expelling a drop from the syringe onto the water surface in a beaker. If the drop remains on the surface and does not disperse when the beaker is agitated slightly, the emulsion is adequate. A properly prepared emulsion is stable for days.
Información legal
CALBIOCHEM is a registered trademark of Merck KGaA, Darmstadt, Germany
Palabra de señalización
Danger
Frases de peligro
Consejos de prudencia
Clasificaciones de peligro
Asp. Tox. 1
Código de clase de almacenamiento
10 - Combustible liquids
Clase de riesgo para el agua (WGK)
WGK 1
Certificados de análisis (COA)
Busque Certificados de análisis (COA) introduciendo el número de lote del producto. Los números de lote se encuentran en la etiqueta del producto después de las palabras «Lot» o «Batch»
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
Los clientes también vieron
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico