Unfortunately, the work function of this product is not measured. Please see the link below to review a publication which indicates a reference value of approximately 4.4 eV:
https://pubs.aip.org/avs/jva/article-abstract/29/1/011019/244332/Work-function-of-fluorine-doped-tin-oxide?redirectedFrom=fulltext
735256
Fluorine doped tin oxide coated glass slide
L × W × D 100 mm × 100 mm × 2.2 mm, surface resistivity ~13 Ω/sq
Synonym(s):
TEC 15, FTO glass
Sign Into View Organizational & Contract Pricing
All Photos(1)
Select a Size
Change View
5 EA
€104.00
About This Item
Recommended Products
description
Haze: ≤0.74%
Quality Level
composition
SnO2/F
packaging
set of 5
surface resistivity
~13 Ω/sq
L × W × D
100 mm × 100 mm × 2.2 mm
transmittance
82-84.5% (visible)
Looking for similar products? Visit Product Comparison Guide
Application
- Fluorine doped tin oxide as an alternative to indium tin oxide for bottom electrode of semi-transparent organic photovoltaic devices: The study evaluated the potential of FTO as a cheaper and more available alternative to ITO in organic photovoltaics, highlighting its suitability due to comparable performance and better availability (Way et al., 2019).
Storage Class Code
13 - Non Combustible Solids
WGK
WGK 2
Flash Point(F)
Not applicable
Flash Point(C)
Not applicable
Choose from one of the most recent versions:
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Customers Also Viewed
Articles
Organic photovoltaics (OPVs) represent a low-cost, lightweight, and scalable alternative to conventional solar cells. While significant progress has been made in the development of conventional bulk heterojunction cells, new approaches are required to achieve the performance and stability necessary to enable commercially successful OPVs.
A transparent conductive electrode (TCE) is an essential component of various optoelectronic devices such as solar cells, liquid-crystal displays (LCD), light-emitting diodes (LED), and touch screens.
Next generation solar cells have the potential to achieve conversion efficiencies beyond the Shockley-Queisser (S-Q) limit while also significantly lowering production costs.
Dr. Perini and Professor Correa-Baena discuss the latest research and effort to obtain higher performance and stability of perovskite materials.
-
What is the work function of these FTO substrates?
1 answer-
Helpful?
-
-
What is the thickness of FTO layer coated in 735256
1 answer-
The FTO coating thickness on this slide is approximately 340 nm.
Helpful?
-
-
What is the point of zero charge of the FTO surface (for both 13 and 7 Ohm resistivity options)?
1 answer-
A zero charge is not reported or determined for this product.
Should you have further questions regarding the relationship between charge and resistivity please navigate to the link https://www.sigmaaldrich.com/techservice, click on "Product Technical Inquiries" under the Products Section with all the required information so that a member of the Technical Service team can reach out to assist further. Thank you.
Helpful?
-
-
What is the maximum heat that Product 735256, Fluorine doped tin oxide coated glass slide can withstand?
1 answer-
Do not exceed 670 C with Product 735256, Fluorine doped tin oxide coated glass slide.
Helpful?
-
-
What type of glass is used for the fluorine doped tin oxide coated glass slides?
1 answer-
The fluorine doped tin oxide (FTO) coated glass slides use TEC GlassTM from Pilkington.
Helpful?
-
-
What is the Department of Transportation shipping information for this product?
1 answer-
Transportation information can be found in Section 14 of the product's (M)SDS.To access the shipping information for this material, use the link on the product detail page for the product.
Helpful?
-
Active Filters
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service
