Skip to Content
Merck
All Photos(1)

Key Documents

94098

Sigma-Aldrich

Drying pearls orange

Synonym(s):

Aluminum silicate, Silica gel orange

Sign Into View Organizational & Contract Pricing
All Photos(1)

About This Item

CAS Number:
1327-36-2
MDL number:
MFCD03098976
UNSPSC Code:
41123003
NACRES:
NA.22
Pricing and availability is not currently available.

description

heavy metal free

Quality Level

100

form

beads

capacity

>30 % absorption capacity (water)(at 80% rel. humidity, 25°C)

SMILES string

[Si](=O)=O

InChI key

VYPSYNLAJGMNEJ-UHFFFAOYSA-N

General description

Drying pearls Orange (Silica gel orange), commonly used as a drying agent in laboratories, is suitable for drying all gases and solids. It is used in desiccators, drying towers, and absorption tubes. Silica gel orange provides longer storage conditions due to its large surface area which enables high absorption capacity. It also changes its color from orange to colorless after moisture absorption (approx. 6 wt% load).[1][2][3]

Reconstitution

regeneration by drying at 130 - 160 °C; do not heat above 160 °C

Storage Class Code

13 - Non Combustible Solids

WGK

nwg

Flash Point(F)

Not applicable

Flash Point(C)

Not applicable

Personal Protective Equipment

dust mask type N95 (US), Eyeshields, Gloves

Choose from one of the most recent versions:

Certificates of Analysis (COA)

Lot/Batch Number
BCCL6132
BCCM2068
BCCK3872
BCCK9451
BCCJ1926

Don't see the Right Version?

If you require a particular version, you can look up a specific certificate by the Lot or Batch number.

Search for a COA

Already Own This Product?

Find documentation for the products that you have recently purchased in the Document Library.

Visit the Document Library

Customers Also Viewed

Slide 1 of 3

1 of 3

Aluminum silicate powder

Sigma-Aldrich

520179

Aluminum silicate

Desiccant sachet 100 g silica gel with humidity indicator (orangegel) sachet: 15 x 14 cm

Supelco

1.03805

Desiccant sachet 100 g

Silica gel packet of 5 g desiccant

Supelco

S8394

Silica gel

M Zabeti et al.
Bioresource technology, 118, 374-381 (2012-06-19)
Canadian pinewood was pyrolyzed at 450 °C in an Infrared oven and the pyrolysis vapors were converted by passing through a catalyst bed at 450 °C. The catalysts studied were amorphous silica alumina (ASA) containing alkali metal or alkaline earth
Georgios Toskas et al.
ACS applied materials & interfaces, 3(9), 3673-3681 (2011-08-24)
Ceramic silica (SiO(2)) hybrid nanofibers were prepared by electrospinning of solutions containing biocompatible polymer and modified silica precursors. The new hybrid nanofibers are based on polyethylene oxide (PEO) and a new solution of modified sol-gel particles of mixture containing tetraethoxysilane
Jamieson K Christie et al.
The journal of physical chemistry. B, 116(41), 12614-12620 (2012-09-18)
The low solubility (high durability) of yttrium aluminosilicate (YAS) glass is one of its most important properties for use in in situ radiotherapy. Simple parameters, such as silica or yttria content or network connectivity, are not sufficient to rationalize the
Jinyang Li et al.
Investigative ophthalmology & visual science, 53(9), 5675-5685 (2012-07-28)
To compare different methods of glycerol-preserved corneas intended for deep anterior lamellar keratoplasty (DALK). We analyzed transparency, transmittance, thickness, biomechanics, morphology, and antigenicity of donor corneas preserved by four different glycerol-based methods (n = 6 per group) for 3 months
Richard A Martin et al.
Journal of materials science. Materials in medicine, 22(11), 2537-2543 (2011-08-31)
Synthetic calcium phosphates, despite their bioactivity, are brittle. Calcium phosphate- mullite composites have been suggested as potential dental and bone replacement materials which exhibit increased toughness. Aluminium, present in mullite, has however been linked to bone demineralisation and neurotoxicity: it
View All Related Papers

Questions

1–3 of 3 Questions  

  1. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 answer

    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      Helpful?

  2. How can I determine the shelf life / expiration / retest date of this product?

    1 answer

    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      Helpful?

  3. Bonjour, quelle est la couleur des perles quand c'est sec et quand c’est humide? Quelle est la température et le temps nécessaire pour régénérer ces perles? Merci d'avance!

    1 answer

    1. This material changes its color from orange to colorless after moisture absorption (approx. 6 wt% load). The protocol for the regeneration is to spread the beads in a thin layer (max 10 mm) in a oven tray, preheat the oven at 110-130C, dry the beads for 90 minutes (or more if after 90 minutes the color is not orange again), and let them cool and place in a airtight container.

      Helpful?

Reviews

No rating value

Active Filters

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service