Saltar al contenido
Merck

Mesoporous silicas synthesis and application for lignin peroxidase immobilization by covalent binding method.

Journal of environmental sciences (China) (2013-04-17)
Zunfang Hu, Longqian Xu, Xianghua Wen
RESUMEN

Immobilization of enzymes on mesoporous silicas (MS) allows for good reusability. MS with two-dimensional hexagonal pores in diameter up to 14.13 nm were synthesized using Pluronic P123 as template and 1,3,5-triisopropylbenzene as a swelling agent in acetate buffer. The surface of MS was modified by the silanization reagents 3-aminopropyltriethoxysilane. Lignin peroxidase (LiP) was successfully immobilized on the modified MS through covalent binding method by four agents: glutaraldehyde, 1,4-phenylene diisothiocyanate, cyanotic chloride and water-soluble carbodiimide. Results showed that cyanotic chloride provided the best performance for LIP immobilization. The loaded protein concentration was 12.15 mg/g and the immobilized LiP activity was 812.9 U/L. Immobilized LiP had better pH stability. Acid Orange II was used to examine the reusability of immobilized LiP, showing more than 50% of the dye was decolorized at the fifth cycle.

MATERIALES
Referencia del producto
Marca
Descripción del producto

Sigma-Aldrich
Pluronic® F-127, powder, BioReagent, suitable for cell culture
Sigma-Aldrich
(3-aminopropil)trietoxisilano, 99%
Sigma-Aldrich
Disolución de poloxamer 188, 10%, sterile-filtered, BioReagent, suitable for insect cell culture
Sigma-Aldrich
Kolliphor P 188, solid
Sigma-Aldrich
Poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol), average Mn ~5,800
Sigma-Aldrich
Poli(etilenglicol)-bloque-poli(propilenglicol)-bloque-poli(etilenglicol))
Sigma-Aldrich
Poli(etilenglicol)-bloque-poli(propilenglicol)-bloque-poli(etilenglicol)), purified, non-ionic
Sigma-Aldrich
(3-aminopropil)trietoxisilano, ≥98.0%
Sigma-Aldrich
Glutaraldehyde solution, Grade I, 25% in H2O, specially purified for use as an electron microscopy fixative
Sigma-Aldrich
Poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol), average Mn ~14,600
Sigma-Aldrich
Poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol), average Mn ~2,900
Sigma-Aldrich
Poli(etilenglicol)-bloque-poli(propilenglicol)-bloque-poli(etilenglicol)), oxyethylene 71.5-74.9 %
Sigma-Aldrich
Glutaraldehyde solution, 50 wt. % in H2O
Sigma-Aldrich
Glutaraldehyde solution, Grade II, 25% in H2O
Sigma-Aldrich
Poly(propylene glycol)-block-poly(ethylene glycol)-block-poly(propylene glycol), average Mn ~3,300
Sigma-Aldrich
(3-aminopropil)trietoxisilano, ≥98%
Sigma-Aldrich
Poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol), average Mn ~4,400
Sigma-Aldrich
Glutaraldehyde solution, Grade I, 70% in H2O, specially purified for use as an electron microscopy fixative or other sophisticated use
Sigma-Aldrich
Poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol), average Mn ~1,900
Sigma-Aldrich
1,3,5-Triisopropylbenzene, 95%
Sigma-Aldrich
Poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol), average Mn ~1,100
Sigma-Aldrich
Glutaraldehyde solution, Grade I, 50% in H2O, specially purified for use as an electron microscopy fixative or other sophisticated use
Sigma-Aldrich
Poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol), average Mn ~2,000
Sigma-Aldrich
Poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol), average Mn ~8,400
Sigma-Aldrich
Glutaraldehyde solution, technical, ~50% in H2O (5.6 M)
Sigma-Aldrich
Poli(etilenglicol)-bloque-poli(propilenglicol)-bloque-poli(etilenglicol))
Sigma-Aldrich
Glutaraldehyde solution, Grade I, 8% in H2O, specially purified for use as an electron microscopy fixative or other sophisticated use
Sigma-Aldrich
Poli(etilenglicol)-bloque-poli(propilenglicol)-bloque-poli(etilenglicol)), surfactant
Sigma-Aldrich
Poli(etilenglicol)-bloque-poli(propilenglicol)-bloque-poli(etilenglicol)), surfactant, non-ionic
Sigma-Aldrich
(3-aminopropil)trietoxisilano, packaged for use in deposition systems, ≥98%