Saltar al contenido
Merck
Todas las fotos(1)

Documentos clave

CRM18918

Supelco

F.A.M.E. Mix

C8 - C24, certified reference material, ampule of 100 mg (Neat)

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Todas las fotos(1)

About This Item

Código UNSPSC:
85151701
NACRES:
NA.24
En este momento no podemos mostrarle ni los precios ni la disponibilidad

grado

certified reference material
TraceCERT®

Línea del producto

TraceCERT®

CofA

current certificate can be downloaded

envase

ampule of 100 mg (Neat)

técnicas

HPLC: suitable
gas chromatography (GC): suitable

aplicaciones

food and beverages

Formato

mixture

grupo funcional

carboxylic acid
ester

Condiciones de envío

dry ice

temp. de almacenamiento

-10 to -25°C

Categorías relacionadas

Descripción general

This Certified Reference Material (CRM) is produced and certified in accordance with ISO 17034 and ISO/IEC 17025. All information regarding the use of this CRM can be found on the certificate of analysis.

Aplicación

The CRM has been used as follows:

  • To determine the fatty acid content in the study to investigate the catalytic activity of Fe-exchanged montmorillonite K10 (Fe-MMT K10) in the conversion of waste cooking oil to biodiesel
  • Assessment of fatty acids in the native microalgal species by gas chromatography-mass spectrometry (GC-MS) to evaluate their lipid content and biomass productivity
  • Fatty acid profiling of oil extracted from grape seeds using GC-MS to study the effect of ultrasound technology on the three extraction methodologies based on low-pressure Soxhlet and Bligh Dyer, and high-pressure supercritical carbon dioxide-SFE
  • To evaluate the fatty acid composition of the biodiesel obtained from the wastewater treatment high-rate algal pond (WWT HRAP) biomass using GC-FID

Otras notas

Refer to the product′s Certificate of Analysis for more information on a suitable instrument technique. Contact Technical Service for further support.

Información legal

TraceCERT is a registered trademark of Merck KGaA, Darmstadt, Germany

Analito

Descripción
    Methyl arachidate 8 wt. %
    Methyl behenate 8 wt. %
    Methyl decanoate 8 wt. %
    Methyl cis-13-docosenoate 5 wt. %
    Methyl dodecanoate 8 wt. %
    Methyl linoleate
    Methyl linolenate 5 wt. %
    Methyl myristate 8 wt. %
    Methyl octanoate 8 wt. %
    Methyl oleate 5 wt. %
    Methyl palmitate 11 wt. %
    Methyl palmitoleate 5 wt. %
    Methyl stearate 8 wt. %
    Methyl tetracosanoate 8 wt. %
    Ver todo (14)

Producto relacionado

Referencia del producto
Descripción
Precios

06693

Timestrip Plus™ -20 °C

Pictogramas

Environment
GHS09

Palabra de señalización

Warning

Frases de peligro

H410

Consejos de prudencia

P273 - P391 - P501

Clasificaciones de peligro

Aquatic Acute 1 - Aquatic Chronic 3

Código de clase de almacenamiento

10 - Combustible liquids

Clase de riesgo para el agua (WGK)

WGK 3

Punto de inflamabilidad (°F)

Not applicable

Punto de inflamabilidad (°C)

Not applicable

Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number

It looks like we've run into a problem, but you can still download Certificates of Analysis from our Documentos section.

Si necesita más asistencia, póngase en contacto con Atención al cliente

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Los clientes también vieron

Slide 1 of 3

1 of 3

F.A.M.E. Mix GLC-10 certified reference material, pkg of 100 mg (Neat)

Supelco

CRM1891

F.A.M.E. Mix GLC-10

F.A.M.E. Mix RM-1 certified reference material, ampule of 100 mg (Neat)

Supelco

O7006-1AMP

F.A.M.E. Mix RM-1

Fatty Acid Methyl Ester Mix certified reference material, ampule of 50 mg (Neat)

Supelco

18913-1AMP

Fatty Acid Methyl Ester Mix

Ayoma Witharana et al.
Environmental technology, 39(16), 2062-2072 (2017-07-01)
Fats, oils and grease (FOG) congregate in grease traps and are a slowly biodegradable particulate organic matter, which may require enzymatic or hydrolytic conversion to form readily biodegradable soluble organic matter. The existing treatment methods employ water-based hydrolysis of FOG
Yung-Yu Tsai et al.
Journal of bioscience and bioengineering, 127(4), 430-440 (2018-10-15)
The oil plants provide a sufficient source of renewable lipid production for alternative fuel and chemical supplies as an alternative to the depleting fossil source, but the environmental effect from these plants' cropping is a concern. The high oleic acid
S Hackenschmidt et al.
FEMS yeast research, 19(7) (2019-10-13)
Despite the increasing relevance, ranging from academic research to industrial applications, only a limited number of non-conventional, oleaginous Yarrowia lipolytica strains are characterized in detail. Therefore, we analyzed three strains in regard to their metabolic and physiological properties, especially with
Rosa Marchetti et al.
Applied microbiology and biotechnology, 103(19), 8267-8279 (2019-08-30)
Recycling of waste cooking oil greatly reduces the environmental impact of its disposal. As fats can give rise to high methane yields, the use of waste cooking oil for biogas production seems a promising solution. The aim of this work
Maria Grazia Melilli et al.
Foods (Basel, Switzerland), 9(6) (2020-06-14)
The addition of functional ingredients to breads could have effects on preventing cardiovascular diseases, cancers and inflammation. The incorporation of 0-5-10-15% of three populations of dried purslane flour on the rheological, sensorial and nutritional quality of fortified durum wheat breads
Ver todos los artículos relacionados

Questions

1–2 of 2 Questions  

  1. How can I determine the shelf life / expiration / retest date of this product?

    1 answer

    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      Helpful?

  2. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 answer

    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      Helpful?

Reviews

No rating value

Active Filters

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico