Saltar al contenido
Merck

46080

Sigma-Aldrich

Ethyl cellulose

48.0-49.5% (w/w) ethoxyl basis

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización


About This Item

Número de CAS:
MDL number:
UNSPSC Code:
12352201
NACRES:
NA.25

Quality Level

assay

48.0-49.5% (w/w) (ethoxyl)

form

coarse powder
powder

autoignition temp.

698 °F

color

beige

refractive index

n20/D 1.47 (lit.)

viscosity

30-70 mPa.s, 5 % in toluene/ethanol 80:20(25 °C)

density

1.14 g/mL at 25 °C (lit.)

¿Está buscando productos similares? Visita Guía de comparación de productos

Application

Ethyl cellulose is generated by converting a variable number of hydroxyl groups on the repeating glucose units to ethyl ether groups. Ethylcellulose is used in the preparation of biostructures such as matrices, microspheres, microparticles, pellets and tablets for use in drug delivery.

Preparation Note

Ethyl Cellulose is soluble in a wide range of solvents such as aliphatic alcohols, chlorinated solvents, and natural oils. It is insoluble in water, glycerin, and prolylene glycol.

Other Notes

To gain a comprehensive understanding of our extensive range of Polysaccharides for your research, we encourage you to visit our Carbohydrates Category page.

Storage Class

11 - Combustible Solids

wgk_germany

WGK 1

flash_point_f

Not applicable

flash_point_c

Not applicable

ppe

Eyeshields, Gloves, type N95 (US)


Certificados de análisis (COA)

Busque Certificados de análisis (COA) introduciendo el número de lote del producto. Los números de lote se encuentran en la etiqueta del producto después de las palabras «Lot» o «Batch»

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Avi Schneider et al.
Proceedings of the National Academy of Sciences of the United States of America, 117(49), 31010-31017 (2020-11-25)
Perovskite solar cells have developed into a promising branch of renewable energy. A combination of feasible manufacturing and renewable modules can offer an attractive advancement to this field. Herein, a screen-printed three-layered all-nanoparticle network was developed as a rigid framework
Kifayat Ullah Shah et al.
TheScientificWorldJournal, 2012, 842348-842348 (2012-06-01)
The design and fabrication of sustained/controlled release dosage forms, employing new excipients capable of extending/controlling the release of drugs from the dosage forms over prolonged periods, has worked well in achieving optimally enhanced therapeutic levels of the drugs. In this
Tetsuya Ozeki et al.
Biological & pharmaceutical bulletin, 35(11), 1926-1931 (2012-11-06)
Production of drug nanoparticles is an effective strategy to enhance solubility and oral absorption of water-insoluble drugs. The handling of drug nanoparticles has been an important issue in drug formulation because nanoparticles easily aggregate each other and redispersion of these
H V Adikane et al.
Applied biochemistry and biotechnology, 169(3), 1026-1038 (2013-01-09)
The chemical modification of developed ethyl cellulose-based membrane was carried out to make it suitable for bioseparation. The different reagents were used for the modification of membrane to couple protein A (PA) to study the purification of immunoglobulin G (IgG)
Joseph D Roy-Mayhew et al.
ACS applied materials & interfaces, 4(5), 2794-2800 (2012-05-03)
Several techniques for fabricating functionalized graphene sheet (FGS) electrodes were tested for catalytic performance in dye-sensitized solar cells (DSSCs). By using ethyl cellulose as a sacrificial binder, and partially thermolyzing it, we were able to create electrodes which exhibited lower

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico