Saltar al contenido
Merck

24233

Sigma-Aldrich

Diclorometano

puriss., meets analytical specification of Ph. Eur., NF, ≥99% (GC)

Sinónimos:

Cloruro de metileno

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización


About This Item

Fórmula empírica (notación de Hill):
CH2Cl2
Número de CAS:
Peso molecular:
84.93
Beilstein:
1730800
Número CE:
Número MDL:
Código UNSPSC:
12352101
ID de la sustancia en PubChem:
NACRES:
NA.04
Ensayo:
≥99% (GC)
bp:
39.8-40 °C (lit.)
presión de vapor:
24.45 psi ( 55 °C)
6.83 psi ( 20 °C)

densidad de vapor

2.9 (vs air)

Nivel de calidad

presión de vapor

24.45 psi ( 55 °C)
6.83 psi ( 20 °C)

grado

puriss.

Ensayo

≥99% (GC)

Formulario

liquid

temp. de autoignición

1223 °F

calidad

meets analytical specification of Ph. Eur., NF

contiene

10-60 ppm amylene as stabilizer

lim. expl.

22 %

impurezas

residual solvents, complies
≤0.0001% free chlorine (Cl)
≤0.001% carbon tetrachloride (GC)
≤0.001% free acid (as HCl)
≤0.002% non-volatile matter
≤0.005% trichloromethane (GC)
≤0.02% methanol (GC)
≤0.02% water (Karl Fischer)
≤1 ppm heavy metals (as Pb)
≤2.0% ethanol (GC)

residuo de evap.

≤20 ppm

índice de refracción

n20/D 1.423-1.425
n20/D 1.424 (lit.)

bp

39.8-40 °C (lit.)

mp

−95 °C (lit.)

densidad

1.318-1.322 g/mL at 25 °C
1.325 g/mL at 25 °C (lit.)

trazas de anión

chloride (Cl-): ≤3 mg/kg

idoneidad

complies for appearance of solution
complies for identity (IR)
complies for reaction against H2SO4

cadena SMILES

ClCCl

InChI

1S/CH2Cl2/c2-1-3/h1H2

Clave InChI

YMWUJEATGCHHMB-UHFFFAOYSA-N

¿Está buscando productos similares? Visita Guía de comparación de productos

Descripción general

Dichloromethane has been tested as a solvent medium for the dipyridine-chromium(VI) oxide. Solubility was reported to be 12.5g/100ml. Role of the quantity of TiO2 loading on activated carbon support on its photodecomposition has been investigated.

Aplicación

Dichloromethane may be used as solvent for the preparation of stock solutions of the carotenoids. It may be employed as solvent in the synthesis of polylactide-based (PLA) thin films.

Otras notas

The article number 24233-4X2.5L-M will be discontinued. Please order the single bottle 24233-2.5L-M which is physically identical with the same exact specifications.
The article number 24233-4X2.5L-R will be discontinued. Please order the single bottle 24233-2.5L-R which is physically identical with the same exact specifications.
The article number 24233-6X1L-M will be discontinued. Please order the single bottle 24233-1L-M which is physically identical with the same exact specifications.
The article number 24233-6X1L-R will be discontinued. Please order the single bottle 24233-1L-R which is physically identical with the same exact specifications.

Pictogramas

Health hazardExclamation mark

Palabra de señalización

Warning

Frases de peligro

Clasificaciones de peligro

Carc. 2 - Eye Irrit. 2 - Skin Irrit. 2 - STOT SE 3

Órganos de actuación

Central nervous system

Código de clase de almacenamiento

6.1D - Non-combustible acute toxic Cat.3 / toxic hazardous materials or hazardous materials causing chronic effects

Clase de riesgo para el agua (WGK)

WGK 2

Punto de inflamabilidad (°F)

does not flash

Punto de inflamabilidad (°C)

does not flash


Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

R Re et al.
Free radical biology & medicine, 26(9-10), 1231-1237 (1999-06-25)
A method for the screening of antioxidant activity is reported as a decolorization assay applicable to both lipophilic and hydrophilic antioxidants, including flavonoids, hydroxycinnamates, carotenoids, and plasma antioxidants. The pre-formed radical monocation of 2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS*+) is generated by oxidation
V Melissinaki et al.
Biofabrication, 3(4), 045005-045005 (2011-09-21)
This study reports on the production of high-resolution 3D structures of polylactide-based materials via multi-photon polymerization and explores their use as neural tissue engineering scaffolds. To achieve this, a liquid polylactide resin was synthesized in house and rendered photocurable via
Dipyridine-chromium (VI) oxide oxidation of alcohols in dichloromethane.
Collins JC, et al.
Tetrahedron Letters, 9(30), 3363-3366 (1968)
Effect of activated carbon content in TiO2-loaded activated carbon on photodegradation behaviors of dichloromethane.
Torimoto T, et al.
Journal of Photochemistry and Photobiology A: Chemistry, 103(1), 153-157 (1997)
Angharad M Roberts et al.
Science translational medicine, 7(270), 270ra6-270ra6 (2015-01-16)
The recent discovery of heterozygous human mutations that truncate full-length titin (TTN, an abundant structural, sensory, and signaling filament in muscle) as a common cause of end-stage dilated cardiomyopathy (DCM) promises new prospects for improving heart failure management. However, realization

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico