Saltar al contenido
Merck
Todas las fotos(1)

Documentos

767506

Sigma-Aldrich

Titanium

sputtering target, diam. × thickness 2.00 in. × 0.25 in., 99.995% trace metals basis

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Todas las fotos(1)

About This Item

Fórmula empírica (notación de Hill):
Ti
Número de CAS:
7440-32-6
Peso molecular:
47.87
EC Number:
231-142-3
MDL number:
MFCD00011264
UNSPSC Code:
12352103
PubChem Substance ID:
329767320
NACRES:
NA.23

Quality Level

100

assay

99.995% trace metals basis

form

solid

autoignition temp.

860 °F

reaction suitability

core: titanium

resistivity

42.0 μΩ-cm, 20°C

diam. × thickness

2.00 in. × 0.25 in.

bp

3287 °C (lit.)

mp

1660 °C (lit.)

density

4.5 g/mL at 25 °C (lit.)

SMILES string

[Ti]

InChI

1S/Ti

InChI key

RTAQQCXQSZGOHL-UHFFFAOYSA-N

Application

Sputtering is a process whereby atoms are ejected from a solid target material due to bombardment of the target by energetic particles. The extreme miniaturization of components in the semiconductor and electronics industry requires high purity sputtering targets for thin film deposition.

Storage Class

11 - Combustible Solids

wgk_germany

nwg

flash_point_f

Not applicable

flash_point_c

Not applicable

Certificados de análisis (COA)

Busque Certificados de análisis (COA) introduciendo el número de lote del producto. Los números de lote se encuentran en la etiqueta del producto después de las palabras «Lot» o «Batch»

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Kostantinidis, S.; et al.
The European Physical Journal - Applied Physics, 56, 24002/1-24002/1 (2011)
Helmersson; U.; et al.
Thin Solid Films, 513, 1-1 (2006)
A Kurbad et al.
International journal of computerized dentistry, 16(2), 125-141 (2013-08-13)
This article presents two novel options for lithium-disilicate restorations supported by single-tooth implants. By using a Ti-Base connector, hybrid abutments and hybrid abutment crowns can be fabricated for different implant systems. The latter option in particular is an interesting new
Jinho Shin et al.
Journal of nanoscience and nanotechnology, 13(8), 5807-5810 (2013-07-26)
In this study, hydroxyapatite (HA) was coated on anodized titanium (Ti) surfaces through radio frequency magnetron sputtering in order to improve biological response of the titanium surface. All the samples were blasted with resorbable blasting media (RBM). RBM-blasted Ti surface
R Khataee et al.
Journal of nanoscience and nanotechnology, 13(7), 5109-5114 (2013-08-02)
In the present study, self-cleaning and mechanical properties of white Portland cement by addition of commercial available TiO2 nanoparticles with the average particle size of 80 nm were investigated. X-ray diffraction (XRD), transmission electron microscopy (TEM) and BET were used
Ver todos los artículos relacionados

Artículos

Nanocomposite Coatings with Tunable Properties Prepared by Atomic Layer Deposition

Nanocomposite Coatings with Tunable Properties Prepared by Atomic Layer Deposition

Progress in Spintronic Materials

Spintronics offer breakthroughs over conventional memory/logic devices with lower power, leakage, saturation, and complexity.

Progress in Spintronic Materials

Spintronics offer breakthroughs over conventional memory/logic devices with lower power, leakage, saturation, and complexity.

Progress in Spintronic Materials

Spintronics offer breakthroughs over conventional memory/logic devices with lower power, leakage, saturation, and complexity.

Ver todo

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico