Saltar al contenido
Merck
Todas las fotos(3)

Documentos clave

Ver Toda la documentación

595063

Sigma-Aldrich

Titanium nitride

<3 μm

Sinónimos:

Titanium mononitride

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Todas las fotos(3)

About This Item

Fórmula lineal:
TiN
Número de CAS:
25583-20-4
Peso molecular:
61.87
Número CE:
247-117-5
Número MDL:
MFCD00049596
Código UNSPSC:
12352300
ID de la sustancia en PubChem:
24881553
NACRES:
NA.23
En este momento no podemos mostrarle ni los precios ni la disponibilidad

Formulario

powder

Nivel de calidad

100

tamaño de partícula

<3 μm

mp

2930 °C (lit.)

densidad

5.24 g/mL at 25 °C (lit.)

cadena SMILES

N#[Ti]

InChI

1S/N.Ti

Clave InChI

NRTOMJZYCJJWKI-UHFFFAOYSA-N

¿Está buscando productos similares? Visita Guía de comparación de productos

Categorías relacionadas

Código de clase de almacenamiento

13 - Non Combustible Solids

Clase de riesgo para el agua (WGK)

WGK 3

Punto de inflamabilidad (°F)

Not applicable

Punto de inflamabilidad (°C)

Not applicable

Equipo de protección personal

Eyeshields, Gloves, type N95 (US)

Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number
STBK2813
STBJ9520
STBJ0694
STBH9389
STBH8378

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

Busque por un COA

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Los clientes también vieron

Slide 1 of 3

1 of 3

Tin nanopowder, &lt;150&#160;nm particle size (SEM), &#8805;99% trace metals basis

Sigma-Aldrich

576883

Tin

Vanadium nitride powder, max. particle size 150 micron, weight 20&#160;g, purity 99%

GF26127255

Vanadium nitride

Silicon nitride powder, &#8805;99.9% trace metals basis

Sigma-Aldrich

334103

Silicon nitride

Vamsi Krishna Balla et al.
Journal of the mechanical behavior of biomedical materials, 6, 9-20 (2012-02-04)
The purpose of this first generation investigation is to evaluate fabrication, in vitro cytotoxicity, cell-material interactions and tribological performance of TiN particle reinforced Ti6Al4V composite coatings for potential wear resistant load bearing implant applications. The microstructural analysis of the composites
Michele C B de Castro et al.
Materials (Basel, Switzerland), 12(3) (2019-02-13)
The Ti-6Al-4V alloy is widely used in the manufacture of components that must have low density and high corrosion resistance and fatigue strength. The fatigue strength can be improved by surface modification. The aim of this study was to determine
Shagayegh Saadati et al.
Analytica chimica acta, 753, 32-41 (2012-10-31)
A novel, simple and facile layer by layer (LBL) approach is used for modification of glassy carbon (GC) electrode with multilayer of catalase and nanocomposite containing 1-(3-Aminopropyl)-3-methylimidazolium bromide (amine terminated ionic liquid (NH(2)-IL)) and titanium nitride nanoparticles (TiNnp). First a
Chuan Ting Wang et al.
Journal of the mechanical behavior of biomedical materials, 17, 166-175 (2012-11-13)
A commercial purity (CP) Grade 2 Ti was processed by high-pressure torsion (HPT) using an imposed pressure of 3.0GPa at room temperature. The HPT processing reduced the grain size from ∼8.6 μm in the as-received state to ultra-fine grains (UFG)
D M Gordin et al.
Journal of materials science. Materials in medicine, 23(12), 2953-2966 (2012-08-25)
In this study, the new Hardion+ micro-implanter technology was used to modify surface properties of biomedical pure titanium (CP-Ti) and Ti-6Al-4V ELI alloy by implantation of nitrogen ions. This process is based on the use of an electron cyclotron resonance
Ver todos los artículos relacionados

Questions

1–2 of 2 Questions  

  1. How can I determine the shelf life / expiration / retest date of this product?

    1 answer

    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      Helpful?

  2. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 answer

    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      Helpful?

Reviews

No rating value

Active Filters

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico