P3C030D00

Pellicon^® 3 Cassette with Ultracel^® Membrane

filtration area 88 cm², NMWCO 30 kDa

• Synonym(s): Pellicon^® 3 Cassette with Ultracel^® 30 kDa Membrane, D screen, 88 cm²
• UNSPSC Code: 41104903
• eCl@ss: 32031602
• NACRES: NB.24

Properties

• material: TPE seal; composite regenerated cellulose (CRC) membrane; polypropylene ; polypropylene cap (for end); polypropylene screen
• Quality Level: 400
• feature: holdup volume 3.6 mL (in feed channel)
• manufacturer/tradename: Pellicon^®
• parameter: 2.75 bar max. inlet pressure (40 psi) at 50 °C; 30 psi max. reverse press. exposure at 25 °C (for 24 hours); 4-6 L/min-m² recirculation rate; 40 psi max. transmembrane pressure at 4-50 °C; 5.5 bar max. inlet pressure (80 psi) at 40 °C; 5.5 bar max. transmembrane pressure (80 psig) at 30 °C; 6.9 bar max. inlet pressure (100 psi); 80 psi max. transmembrane pressure at 4-40 °C
• technique(s): analytical sample preparation: suitable; buffer exchange: suitable; protein purification: suitable (concentration)
• H: 0.8 cm (0.33 in.)
• L: 20.6 cm (8.1 in.)
• W: 5.6 cm (2.2 in.)
• filtration area: 88 cm²
• membrane area: 88 cm²
• gravimetric extractables: ≤1500 mg/m²
• matrix: Ultracel^® (Membrane)
• pore size: 30 kDa NMWCO
• pH: 2-13
• shipped in: ambient

Description

General description

Pellicon^® 3 filtration devices are advanced, high-performance cassettes ideal for today’s higher titer therapeutic antibodies as well as the more demanding filtration processes that require higher operating pressures, temperatures and caustic cleaning regimes.

The Pellicon^® 3 Cassette with Ultracel^® Membrane is designed for the filtration of therapeutic proteins (such as monoclonal antibodies) and recombinant and non-recombinant proteins.

This P3C030D00 Pellicon^® 3 ultrafiltration device features a pore size of 30 kDa NMWCO, a filtration area of 88 cm², a PLCTK membrane, and dimensions measuring 3.8 cm (H) x 17.8 cm (W) x 20.6 cm (L).

Features and Benefits

• Rugged & reliable – ideally suited for today′s more demanding filtration processes
• High performance – produces excellent resolution, yields and back-pressure resistance
• Optimum product recovery – thanks to proven membrane technology
• Void-free technology – leading-edge membranes resolve virtually any separation challenge
• Defect-free, superior adhesion – Ultracel^®uses composite membranes cast on a microporous substrate
• Automated manufacturing – delivers unbeatable performance, consistency and reliability
• Easy installation & care – simple to install and maintain

Other Notes

These products are manufactured in a facility which adheres to Good Manufacturing Practices.

Analysis Note

Gravimetric Extractables: after 24 hours in water at controlled room temperature

Legal Information

Pellicon is a registered trademark of Merck KGaA, Darmstadt, Germany

ULTRACEL is a registered trademark of Merck KGaA, Darmstadt, Germany