Direkt zum Inhalt
Merck
  • Derivatization method for sensitive determination of 3-hydroxybenzo[a]pyrene in human urine by liquid chromatography-electrospray tandem mass spectrometry.

Derivatization method for sensitive determination of 3-hydroxybenzo[a]pyrene in human urine by liquid chromatography-electrospray tandem mass spectrometry.

Journal of chromatography. A (2015-01-04)
Kai Luo, Qun Gao, Jianying Hu
ZUSAMMENFASSUNG

While urinary 3-hydroxybenzo[a]pyrene (3-OHBaP) can indicate exposure to carcinogenic benzo[a]pyrene (BaP) in humans, most previous analytical methods could not detect it in the general population due to a lack of sufficient sensitivity. In this study, a new liquid chromatography-electrospray mass-mass spectrometry (LC-ESI-MS/MS) method was developed to analyze 3-OHBaP by employing an optimized derivatization reaction with dansyl chloride (DNS) in the aqueous phase. The instrument detection limit (IDL) of the newly developed method was 10ng/L, which is 60-fold lower than without derivatization. The method was successfully applied to analyze 3-OHBaP and 1-hydroxypyrene (1-OHPy) in human urine combined with enzymatic hydrolysis, C18 enrichment, liquid-liquid extraction and silica cartridge cleanup. The overall method recoveries were 68.7±5.47% for 3-OHBaP and 72.3±4.96% for 1-OHPy, with matrix effects of <10%. The limits of quantification (LOQs) in urine were 0.3±0.02ng/L and 0.5±0.02ng/L (n=3), respectively. The method was applied to analyze seven urine samples of volunteers, and 3-OHBaP was detected in five samples. The concentration of urinary 3-OHBaP ranged from <LOD to 2.30ng/L, much lower than those (42.0-216ng/L) of 1-OHPy. The developed method provides a new way to sensitively determine 3-OHBaP in urine of the general population.

MATERIALIEN
Produktnummer
Marke
Produktbeschreibung

Sigma-Aldrich
Acetonitril, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Methanol, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Aceton, ACS reagent, ≥99.5%
Sigma-Aldrich
Tetrahydrofuran, inhibitor-free, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Dichlormethan, suitable for HPLC, ≥99.8%, contains amylene as stabilizer
Sigma-Aldrich
Methanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Aceton, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Acetonitril, HPLC Plus, ≥99.9%
Sigma-Aldrich
Dichlormethan, contains 40-150 ppm amylene as stabilizer, ACS reagent, ≥99.5%
Sigma-Aldrich
Aceton, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%
Sigma-Aldrich
Tetrahydrofuran, contains 250 ppm BHT as inhibitor, ACS reagent, ≥99.0%
Sigma-Aldrich
Methanol, HPLC Plus, ≥99.9%
Sigma-Aldrich
Dichlormethan, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%, contains 50-150 ppm amylene as stabilizer
Sigma-Aldrich
Natriumcarbonat, powder, ≥99.5%, ACS reagent
Sigma-Aldrich
Hexan, ReagentPlus®, ≥99%
Sigma-Aldrich
Acetonitril, ACS reagent, ≥99.5%
Sigma-Aldrich
Hexan, suitable for HPLC, ≥95%
Sigma-Aldrich
Natriumcarbonat, ACS reagent, anhydrous, ≥99.5%, powder or granules
Sigma-Aldrich
Acetonitril, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Hexan, Laboratory Reagent, ≥95%
Sigma-Aldrich
Methanol, suitable for HPLC, gradient grade, suitable as ACS-grade LC reagent, ≥99.9%
Sigma-Aldrich
4-(Dimethylamino)-pyridin, ReagentPlus®, ≥99%
Sigma-Aldrich
Hexan, HPLC Plus, for HPLC, GC, and residue analysis, ≥95%
Sigma-Aldrich
Dichlormethan, ACS reagent, ≥99.5%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
Acetonitril, anhydrous, 99.8%
Sigma-Aldrich
Tetrahydrofuran, anhydrous, ≥99.9%, inhibitor-free
Sigma-Aldrich
Natriumcarbonat, ACS reagent (primary standard), anhydrous, 99.95-100.05% dry basis
Sigma-Aldrich
Methanol, Laboratory Reagent, ≥99.6%
Sigma-Aldrich
Dichlormethan, anhydrous, ≥99.8%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
Natriumcarbonat, ReagentPlus®, ≥99.5%