Direkt zum Inhalt
Merck
  • Removal of Pb(II) ions from aqueous solution using water hyacinth root by fixed-bed column and ANN modeling.

Removal of Pb(II) ions from aqueous solution using water hyacinth root by fixed-bed column and ANN modeling.

Journal of hazardous materials (2014-04-15)
Tania Mitra, Biswajit Singha, Nirjhar Bar, Sudip Kumar Das
ZUSAMMENFASSUNG

Hyacinth root was used as a biosorbent for generating adsorption data in fixed-bed glass column. The influence of different operating parameters like inlet Pb(II) ion concentration, liquid flow rate and bed height on the breakthrough curves and the performance of the column was studied. The result showed that the adsorption efficiency increased with increase in bed height and decreased with increase in inlet Pb(II) ion concentration and flow rate. Increasing the flow rate resulted in shorter time for bed saturation. The result showed that as the bed height increased the availability of more number of adsorption sites in the bed increased, hence the throughput volume of the aqueous solution also increased. The adsorption kinetics was analyzed using different models. It was observed that maximum adsorption capacity increased with increase in flow rate and initial Pb(II) ion concentration but decreased with increase in bed height. Applicability of artificial neural network (ANN) modeling for the prediction of Pb(II) ion removal was also reported by using multilayer perceptron with backpropagation, Levenberg-Marquardt and scaled conjugate algorithms and four different transfer functions in a hidden layer and a linear output transfer function.

MATERIALIEN
Produktnummer
Marke
Produktbeschreibung

Sigma-Aldrich
Salpetersäure, ACS reagent, 70%
Sigma-Aldrich
Natriumhydroxid, ACS reagent, ≥97.0%, pellets
Sigma-Aldrich
Natriumhydroxid, reagent grade, ≥98%, pellets (anhydrous)
Sigma-Aldrich
Natronlauge, 50% in H2O
Sigma-Aldrich
Salpetersäure, 70%, purified by redistillation, ≥99.999% trace metals basis
Sigma-Aldrich
Natronlauge, BioUltra, for molecular biology, 10 M in H2O
Sigma-Aldrich
Natriumhydroxid, BioXtra, ≥98% (acidimetric), pellets (anhydrous)
Sigma-Aldrich
Natronlauge, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
Natriumhydroxid, puriss., meets analytical specification of Ph. Eur., BP, NF, E524, 98-100.5%, pellets
Sigma-Aldrich
Natriumhydroxid, reagent grade, 97%, powder
Sigma-Aldrich
Natriumhydroxid, pellets, semiconductor grade, 99.99% trace metals basis
Sigma-Aldrich
Salpetersäure, puriss. p.a., 65.0-67.0%
Sigma-Aldrich
Natronlauge, 5.0 M
Sigma-Aldrich
Natriumhydroxid, beads, 16-60 mesh, reagent grade, 97%
Sigma-Aldrich
Salpetersäure, red, fuming, HNO3 >90 %
Sigma-Aldrich
Natriumhydroxid, reagent grade, 97%, flakes
Sigma-Aldrich
Natriumhydroxid, BioUltra, for luminescence, ≥98.0% (T), pellets
Sigma-Aldrich
Natriumhydroxid, ultra dry, powder or crystals, 99.99% trace metals basis
Supelco
Natronlauge-Konzentrat, 0.1 M NaOH in water (0.1N), Eluent concentrate for IC
Supelco
Salpetersäure-Konzentrat, 0.1 M HNO3 in water (0.1N), eluent concentrate for IC
Sigma-Aldrich
Salpetersäure, ACS reagent, ≥90.0%
Supelco
Natronlauge, 49-51% in water, eluent for IC
Sigma-Aldrich
Natriumhydroxid-16O -Lösung, 20 wt. % in H216O, 99.9 atom % 16O
Sigma-Aldrich
3-Ethyl-2,4-pentandion, Tautormermischung, 98%
Sigma-Aldrich
Salpeter-14N-Säurelösung, ~10 N in H2O, 99.99 atom % 14N
Sigma-Aldrich
Natriumhydroxid, anhydrous, free-flowing, Redi-Dri, reagent grade, ≥98%, pellets