Direkt zum Inhalt
Merck
  • Lead (Pb) and other metals in New York City community garden soils: factors influencing contaminant distributions.

Lead (Pb) and other metals in New York City community garden soils: factors influencing contaminant distributions.

Environmental pollution (Barking, Essex : 1987) (2014-02-08)
Rebecca G Mitchell, Henry M Spliethoff, Lisa N Ribaudo, Donna M Lopp, Hannah A Shayler, Lydia G Marquez-Bravo, Veronique T Lambert, Gretchen S Ferenz, Jonathan M Russell-Anelli, Edie B Stone, Murray B McBride
ZUSAMMENFASSUNG

Urban gardens provide affordable fresh produce to communities with limited access to healthy food but may also increase exposure to lead (Pb) and other soil contaminants. Metals analysis of 564 soil samples from 54 New York City (NYC) community gardens found at least one sample exceeding health-based guidance values in 70% of gardens. However, most samples (78%) did not exceed guidance values, and medians were generally below those reported in NYC soil and other urban gardening studies. Barium (Ba) and Pb most frequently exceeded guidance values and along with cadmium (Cd) were strongly correlated with zinc (Zn), a commonly measured nutrient. Principal component analysis suggested that contaminants varied independently from organic matter and geogenic metals. Contaminants were associated with visible debris and a lack of raised beds; management practices (e.g., importing uncontaminated soil) have likely reduced metals concentrations. Continued exposure reduction efforts would benefit communities already burdened by environmental exposures.

MATERIALIEN
Produktnummer
Marke
Produktbeschreibung

Sigma-Aldrich
Zink, dust, <10 μm, ≥98%
Sigma-Aldrich
Zink, powder, <150 μm, 99.995% trace metals basis
Sigma-Aldrich
Zink, nanopowder, 40-60 nm avg. part. size, ≥99% trace metals basis
Sigma-Aldrich
Zink, foil, thickness 0.25 mm, 99.9% trace metals basis
Sigma-Aldrich
Cadmium, granular, 30-80 mesh, ≥99%
Sigma-Aldrich
Zink, granular, 20-30 mesh, ACS reagent, ≥99.8%
Sigma-Aldrich
Blei, powder, −100 mesh, 99.95% trace metals basis
Sigma-Aldrich
Cadmium, powder, −100 mesh, 99.5% trace metals basis
Zink, foil, 300x300mm, thickness 0.1mm, as rolled, 99.95+%
Sigma-Aldrich
Cadmium, granular, ≥99%, 5-20 mesh
Sigma-Aldrich
Zink, granular, 30-100 mesh, 99%
Sigma-Aldrich
Zink, purum, powder
Sigma-Aldrich
Zink Zubereitung, 5 g/dL Zn+2 in THF, highly reactive Rieke®metal
Sigma-Aldrich
Zink, sticks, diam. 7-10 mm, 99.97% trace metals basis
Sigma-Aldrich
Zink, mossy, ≥99%
Sigma-Aldrich
Zink, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.9%, granular
Sigma-Aldrich
Zink, shot, <12 mm, 99.99% trace metals basis
Blei, rod, 100mm, diameter 19.0mm, 99.95%
Sigma-Aldrich
Blei, shot, 1-3 mm, 99.995% trace metals basis
Sigma-Aldrich
Blei, shot, <2 mm, 99.9% trace metals basis
Sigma-Aldrich
Zink, pieces, 2-14 mesh, 99.9% trace metals basis
Sigma-Aldrich
Zink, foil, thickness 0.25 mm, 99.999% trace metals basis
Sigma-Aldrich
Zink, foil, thickness 1.0 mm, 99.99% trace metals basis
Sigma-Aldrich
Blei, powder, −325 mesh, ≥99% trace metals basis
Sigma-Aldrich
Zink, wire, diam. 1.0 mm, 99.995% trace metals basis
Sigma-Aldrich
Zink, shot, 5 mm, 99.999% trace metals basis
Zink, wire reel, 5m, diameter 1.0mm, 99.99+%
Blei, foil, 300x300mm, thickness 0.25mm, as rolled, 99.95%
Sigma-Aldrich
Cadmium, shot, 3 mm, 99.999% trace metals basis
Zink, foil, 100x100mm, thickness 0.1mm, as rolled, 99.95+%