Direkt zum Inhalt

Metal loaded zeolite adsorbents for hydrogen cyanide removal.

Metal loaded zeolite adsorbents for hydrogen cyanide removal.

Journal of environmental sciences (China) (2013-08-09)

Ping Ning, Juan Qiu, Xueqian Wang, Wei Liu, Wei Chen

ZUSAMMENFASSUNG

Metal (Cu, Co, or Zn) loaded ZSM-5 and Y zeolite adsorbents were prepared for the adsorption of hydrogen cyanide (HCN) toxic gas. The results showed that the HCN breakthrough capacity was enhanced significantly when zeolites were loaded with Cu. The physical and chemical properties of the adsorbents that influence the HCN adsorption capacity were analyzed. The maximal HCN breakthrough capacities were about the same for both zeolites at 2.2 mol of HCN/mol of Cu. The Cu2p XPS spectra showed that the possible species present were Cu2O and CuO. The N1s XPS data and FT-IR spectra indicated that CN(-) would be formed in the presence of Cu+/Cu2+ and oxygen gas, and the reaction product could be adsorbed onto Cu/ZSM-5 zeolite more easily than HCN.

MATERIALIEN

Produktnummer

Marke

Produktbeschreibung

Sigma-Aldrich

Kupfer, powder, 99.999% trace metals basis

Sigma-Aldrich

Kupfer, foil, thickness 0.25 mm, 99.98% trace metals basis

Sigma-Aldrich

Zeolith

Sigma-Aldrich

Kupfer, powder, <425 μm, 99.5% trace metals basis

Sigma-Aldrich

Kupfer, wire, diam. 1.0 mm, ≥99.9%

Sigma-Aldrich

Kupfer, powder (spheroidal), 10-25 μm, 98%

Sigma-Aldrich

Kupfer, nanopowder, 40-60 nm particle size (SAXS), ≥99.5% trace metals basis

Sigma-Aldrich

Kupfer, powder, <75 μm, 99%

Sigma-Aldrich

Alumosilikat, mesostrukturiert, MCM-41 (hexagonal)

Sigma-Aldrich

Kupfer, wire, diam. 0.25 mm, 99.999% trace metals basis

Sigma-Aldrich

Kupfer, nanopowder, 60-80 nm particle size (SAXS), ≥99.5% trace metals basis

Sigma-Aldrich

Kupfer, foil, thickness 0.025 mm, 99.98% trace metals basis

Sigma-Aldrich

Kupfer, powder (dendritic), <45 μm, 99.7% trace metals basis

Sigma-Aldrich

Kupfer, foil, ≥99.8% (complexometric)

Sigma-Aldrich

Kupfer, turnings, purum p.a., ≥99.0%

Sigma-Aldrich

Kupfer, foil, thickness 0.5 mm, 99.98% trace metals basis

Sigma-Aldrich

Kupfer, wire, diam. 0.64 mm, 99.995% trace metals basis

Sigma-Aldrich

Kupfer, beads, 2-8 mm, 99.9995% trace metals basis

Sigma-Aldrich

Kupfer, shot, −3-+14 mesh, 99%

Sigma-Aldrich

Kupfer, foil, thickness 1.0 mm, 99.999% trace metals basis

Sigma-Aldrich

Kupfer, wire, diam. 2.0 mm, 99.999% trace metals basis

Sigma-Aldrich

Kupfer, ACS reagent, granular, 10-40 mesh, ≥99.90%

Sigma-Aldrich

Kupfer, beads, 2-8 mm, ≥99.99% trace metals basis

Kupfer (S, P), BCR^®, certified reference material, chips

Kupfer, IRMM^®, certified reference material, 0.5 mm wire

Kupfer, IRMM^®, certified reference material, 0.1 mm foil

Stranggusskupfer (O), BCR^®, certified reference material, rod

Kupfer (O), BCR^®, certified reference material, rod