GTTP03700

Polycarbonat-Membranfilter, Porengröße 0,22 μm

Isopore^™, filter diam. 37 mm, hydrophilic

• Synonym(e): Isopore^™ Membrane Filter
• UNSPSC-Code: 40161507
• eCl@ss: 32031602
• NACRES: NB.24

Eigenschaften

• Materialien: plain filter; polycarbonate membrane; white filter
• Sterilität: non-sterile
• Leistungsmerkmale: hydrophilic
• Hersteller/Markenname: Isopore^™; Millipore
• Parameter: 0.007 L/min-cm²-psi air flow rate; 140 °C max. temp.; 3.36 mL/min-cm²-psi water flow rate (maximum flow rate per 1.0 psi); ~16 mL/min-cm² water flow rate at 10 psi (typical results)
• Filterdurchm.: 37 mm
• Dicke: 25 μm
• Gravimetrisch bestimmte extrahierbare Substanzen: <1%
• Brechungsindex: n/D 1.6
• Matrix: Isopore^™
• Porengröße: 0.22 μm pore size; 13.8 % porosity
• Blasenpunkt: ≥5.2 bar, air with water at 23 °C
• Versandbedingung: ambient

Beschreibung

Allgemeine Beschreibung

The Isopore^™ membrane is a polycarbonate, track-etched screen filter useful in surface visualization. It is useful in the analysis of airborne contaminants using optical or electron microscopy. The precise pore diameter and a consistent pore size enable accurate size-base sample separation. Isopore^™ membrane filters are applicable for use in chemotaxis assay, air, monitoring and epifluorescent microscopy.

Anwendung

• Chemotaxis
• Bioassays
• Cytology
• Air monitoring
• SEM analysis
• Sterility testing
• Microplastics analysis
• Microplastics analysis grade water

Leistungsmerkmale und Vorteile

• Isopore^™ membrane structure enables particles retention on the surface for easy counting and analysis.
• Displays low background interference.
• Non-hygroscopic.
• reduced sample analysis time.
• Translucent material.

Vorsicht

Possible reduction in flow rates may occur after autoclaving.

Rechtliche Hinweise

ISOPORE is a trademark of Merck KGaA, Darmstadt, Germany