FGLP02500

PTFE Membrane Filter, 0.22 μm Pore Size

Fluoropore^®, hydrophobic

• Synonym(s): Fluoropore Membrane Filter
• UNSPSC Code: 40161507
• NACRES: NB.24
• eCl@ss: 32031602
• Pore size: 0.22 μm pore size, 63 % porosity
• Material: PTFE membrane, plain filter, white filter
• Feature: hydrophobic
• Diam.: 25 mm
• Sterility: non-sterile

Properties

• material: PTFE membrane, plain filter, white filter
• sterility: non-sterile
• feature: hydrophobic
• manufacturer/tradename: Fluoropore^®, Millipore
• sustainability: Sustainability features
• parameter: 2.5 air flow rate (L/hr-cm2 at 12 mbar (0.17 psi)), 130 °C max. temp. (Curling may occur at elevated temperatures)
• diam.: 25 mm
• filter diam.: 25 mm
• thickness: 128 μm , Typical
• gravimetric extractables: ≤0.5%
• matrix: Fluoropore^®
• pore size: 0.22 μm pore size, 63 % porosity
• bubble point: ≥1.21 bar (17.6 psi), air with 100% IPA at 23 °C
• shipped in: ambient

Description

General description

Our Fluoropore^® membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a polypropylene support to improve the handling characteristics of the filter for normal applications. Fluoropore membranes provide broad chemical compatibility, high flow rates and consistency. (Please note that catalogue numbers containing "FHUP" are unlaminated, or produced without a backing.)

Our Omnipore membrane is a hydrophilic PTFE membrane that is compatible with virually all solvents, acids, and alkaline solutions.

Features & Benefits:


- Biologically and chemically inert


- High porosity yields high flow rates


- Hydrophobic and hydrophilic PTFE varieties available for filtration of aqueous and organic-based samples

Applications:


- Fluoropore Membrane: Clarifying Acids, Bases and Solvents; Air Monitoring; Filtering and Venting Gases; UV Spectroscopy

- Omnipore Membrane: Filtration of Aqueous Solutions, Clarifying Acids and Alkaline Solution

Filter Type: Screen filter

Filter Code: FGLP

We are committed to bringing you Greener Alternative Products, which have been re-engineered to enable more sustainable research solutions. The inner & outer boxes containing the membrane discs are made from bio-circular material allocated using the ISCC mass balance approach. Click here for more information.

Application

• Clarifying acids, bases, and solvents
• Filtering or venting gases
• UV spectroscopy
• Particle monitoring
• HPLC, UPLC, LC-MS/MS mobile phase filtration
• Microplastics analysis

Other Notes

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: General laboratory filtration
• Intended Use: Retention or removal of biological contaminants
• Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 μm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Legal Information

Fluoropore is a registered trademark of Merck KGaA, Darmstadt, Germany

Safety Information

• Storage Class: 11 - Combustible Solids
• WGK: WGK 3