SW06A47FF3

Milligard^® 0.5 µm nominal, OptiScale^® Capsule

filtration area 17.7 cm², OptiScale^® 47, pore size 0.5 μm

• Synonyma: Optiscale Capsule Filter Milligard 0.5 μm 3/4 in. TC/TC, Milligard^® 0.5 µm nominal, OptiScale^® Capsule
• eCl@ss: 32031690
• UNSPSC Code: 23151806

Vlastnosti

• Název produktu: OptiScale^® 47 Capsule Media: Milligard^® 0.5 µm Nominal, Max Pressure: 80 psi @ 25 °C
• Quality Segment: 400
• material: PVDF vent cap, fluoroelastomer FKM seal, mixed cellulose esters (MCE) membrane, polycarbonate , polypropylene support
• reg. compliance: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
• sterility: non-sterile
• sterilization compatibility: autoclavable compatible
• product line: OptiScale^® 47
• feature: hydrophilic
• manufacturer/tradename: OptiScale^®
• parameter: 25 °C max. inlet temp., 5.5 bar max. inlet pressure (80 psi) at 25 °C, 80 psig max. inlet pressure
• technique(s): prefiltration: suitable
• diam.: 6.9 cm (2.7 in.)
• filtration area: 17.7 cm²
• inlet connection diam.: 3/4 in.
• outlet connection diam.: 3/4 in.
• impurities: ≤0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
• matrix: Milligard^®
• pore size: 0.5 μm nominal pore size, 0.5 μm pore size
• fitting: inlet sanitary flange, outlet sanitary flange, (19 mm (3/4 in.) Sanitary Flange Inlet and Outlet)

Popis

General description

Device Configuration: Capsule

Features and Benefits

Format: Single Layer

Preparation Note

Sterilization Method
3 autoclave cycles of 60 min @ 121 °C; not in-line steam sterilizable

Analysis Note

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥100 mL

Other Notes

Directions for Use

• Organism Retention: Bacterial
• Mode of Action: Filtration (size exclusion)
• Application: Protein purification
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer installation and wetting sections of OPTISCALE^®-25 user guide
• Storage Statement: Please refer OPTISCALE^®-25 user guide
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Legal Information

MILLIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

OptiScale is a registered trademark of Merck KGaA, Darmstadt, Germany

Bezpečnostní informace

• Skladovací třída: 4.1B - Flammable solid hazardous materials
• wgk: WGK 2