MFSL06ST3
Millipak® Final Fill 60 Durapore®
Inlet: 1.5 in. Sanitary Flange Outlet: 1.5 in. Sanitary Flange Vent: 1/8 in. Hose Barb
Synonyma:
Durapore® 5.0 µm, Millipak® Final Fill Capsule
Vybrat velikost
| Vám/Skladová položka | Dostupnost | Cena |
|---|---|---|
3 pkg |
O této položce
Tuto položku nemůže nakupovat uživatel, který je přihlášen jako host. Potřebujete-li další informace, obraťte se na nás prostřednictvím +420 225 296 100nebo
.Název produktu
Millipak® Final Fill 60 Durapore®, Inlet: 1.5 in. Sanitary Flange Outlet: 1.5 in. Sanitary Flange Vent: 1/8 in. Hose Barb
Quality Segment
material
PVDF membrane, polysulfone housing, polysulfone support, silicone O-ring
reg. compliance
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility
sterile
product line
Millipak® Final Fill
feature
hydrophilic
manufacturer/tradename
Durapore®
parameter
0.7 bar max. differential pressure (10 psid) at 25 °C (Reverse), 1.7 bar max. differential pressure (25 psid) at 80 °C (Forward), 3.5 bar max. differential pressure (50 psid) at 25 °C (Forward)
technique(s)
prefiltration: suitable
filter diam.
7.6 cm (3.0 in.)
filter filtration area
300 cm2
impurities
<0.25 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
matrix
Durapore®
pore size
5.0 μm pore size
bubble point
≥2586 mbar (37.5 psig), nitrogen with 70/30% IPA/water
fitting
38 mm (1 1/2 in.) inlet sanitary flange, 38 mm (1 1/2 in.) outlet sanitary flange
General description
Packaging
Preparation Note
This product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b)(6), validated based on large volume parenteral specifications as detailed in USP 788 Particulate Matter in Injections
Other Notes
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: BioProcessing
- Intended Use: Reduction or removal of microorganism/bioburden
- Instructions for Use: Please refer general guidelines section of user guide shipped with this product
- Storage Statement: Please refer user guide shipped with this product
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations
Legal Information
1 of 1
Tato položka | |||
|---|---|---|---|
| pore size 5.0 μm pore size | pore size 5.0 μm pore size | pore size 0.22 μm pore size | pore size 0.22 μm pore size |
| technique(s) prefiltration: suitable | technique(s) prefiltration: suitable | technique(s) sterile filtration: suitable | technique(s) sterile filtration: suitable |
| product line Millipak® Final Fill 60 | product line Millipak® Final Fill | product line Millipak® Final Fill | product line Millipak® Final Fill |
| sterility irradiated, sterile; γ-irradiated | sterility non-sterile | sterility sterile | sterility sterile |
| matrix Durapore® | matrix Durapore® | matrix Durapore® | matrix Durapore® |
| manufacturer/tradename Millipak® | manufacturer/tradename Durapore® | manufacturer/tradename Durapore® | manufacturer/tradename Durapore® |
Still not finding the right product?
Explore all of our products under Millipak® Final Fill 60 Durapore®
Dodržování zásad SVP pomocí programu Emprove®
Urychlete kvalifikaci, zajistěte shodu s předpisy a ušetřete čas s nástrojem Emprove® Dossiers.
Poznámka: budete přeneseni na stránky EmproveSuite.com. Vaše uživatelské jméno a heslo jsou oddělené od stránek SigmaAldrich.com a mohou se lišit.
Zaregistrujte se zdarma a získejte přístup k Emprove® Dossiers během několika minut. Upgradujte svůj plán předplatného a odemkněte si pokročilý a přizpůsobený obsah v Emprove® Suite.
Nenašli jste, co jste hledali? Navštivte stránku nápovědy programu Emprove®..
Již tento produkt vlastníte?
Dokumenty související s produkty, které jste v minulosti zakoupili, byly za účelem usnadnění shromážděny ve vaší Knihovně dokumentů.