D030F3P01

Clarigard^® Cartridge Filter

pore size 3.0 μm, cartridge nominal length 30 in. (75 cm), Code F (double open end w/flat gaskets)

• Synonyma: Clarigard Cartridge Filter 30 in. 3.0 μm Code F PE
• eCl@ss: 32031690
• UNSPSC Code: 23151806

Vlastnosti

• Quality Segment: 400
• material: polyethylene seal, polypropylene
• feature: hydrophilic
• manufacturer/tradename: Clarigard^®
• parameter: 4.8 bar max. differential pressure (70 psid) at 25 °C, 4.8 bar max. inlet pressure (70 psi) at 25 °C
• cartridge nominal length: 30 in. (75 cm)
• diam.: 6.7 cm (2.6 in.)
• impurities: ≤0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
• gravimetric extractables: ≤30 mg
• pore size: 3.0 μm nominal pore size, 3.0 μm pore size
• input: sample type liquid
• cartridge code: Code F (double open end w/flat gaskets)

Popis

General description

Device Configuration: Cartridge

Preparation Note

Sterilization Method
10 autoclave cycles or SIP @ 126 °C for 30 min

Analysis Note

Gravimetric Extractables: after 24-h soak in water

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥9 L

Other Notes

Directions for Use

• Organism Retention: 99.99% retention
• Mode of Action: Filtration (nominal)
• Application: BioProcessing
• Intended Use: Bioburden reduction
• Instructions for Use: Please refer to the Polygard^® and Clarigard^® Cartridges user guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Legal Information

CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany