Saltar al contenido
Merck

12090

Sigma-Aldrich

Calcium sulfate hemihydrate

purum, ≥97.0%

Sinónimos:

Calcium sulphate hemihydrate, Gypsum hemihydrate

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización


About This Item

Fórmula lineal:
CaSO4 · 0.5H2O
Número de CAS:
Peso molecular:
145.15
Número CE:
Número MDL:
Código UNSPSC:
12352302
ID de la sustancia en PubChem:
Ensayo:
≥97.0%

grado

purum

Nivel de calidad

Ensayo

≥97.0%

cadena SMILES

O.[Ca++].[Ca++].[O-]S([O-])(=O)=O.[O-]S([O-])(=O)=O

InChI

1S/2Ca.2H2O4S.H2O/c;;2*1-5(2,3)4;/h;;2*(H2,1,2,3,4);1H2/q2*+2;;;/p-4

Clave InChI

ZOMBKNNSYQHRCA-UHFFFAOYSA-J

¿Está buscando productos similares? Visita Guía de comparación de productos

Categorías relacionadas

Código de clase de almacenamiento

11 - Combustible Solids

Clase de riesgo para el agua (WGK)

WGK 1

Punto de inflamabilidad (°F)

Not applicable

Punto de inflamabilidad (°C)

Not applicable


Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Los clientes también vieron

Clovis Monteiro Bramante et al.
Journal of applied oral science : revista FOB, 21(1), 32-36 (2013-04-06)
To evaluate the biocompatibility and the setting time of Portland cement clinker with or without 2% or 5% calcium sulfate and MTA-CPM. Twenty-four mice (Rattus norvegicus) received subcutaneously polyethylene tubes filled with Portland cement clinker with or without 2% or
Angela R Roper et al.
Health physics, 104(3), 264-269 (2013-01-31)
Coal combustion residues from coal-fired power plants can be advantageous for use in building and construction materials. These by-products contain trace quantities of naturally occurring radionuclides from the uranium and thorium series, as well as other naturally occurring radionuclides such
So-Yeun Kim et al.
The International journal of prosthodontics, 26(2), 161-163 (2013-03-12)
The purpose of this investigation was to measure the accuracy of digital impressions (DIs) compared to conventional impressions (CIs). Using the iTero system, a master cast was scanned to produce stereolithography dies. As a control group, silicone impressions were taken
Anand Rajapur et al.
The journal of contemporary dental practice, 13(6), 824-829 (2013-02-14)
While literature demonstrates that the optimum accuracy is obtained with the custom trays, the use of stock trays for elastomeric impressions appears to be popular in general practice. The aim of the study was to evaluate the effect of thickness
Massimo Peruffo et al.
Physical chemistry chemical physics : PCCP, 15(6), 1956-1965 (2012-12-22)
Dissolution processes at single crystal surfaces often involve the initial formation and expansion of localized, characteristic (faceted) etch-pits at defects, in an otherwise comparatively unreactive surface. Using natural gypsum single crystal as an example, a simple but powerful morphological analysis

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico