Saltar al contenido
Merck
Todas las fotos(2)

Documentos clave

Ver Toda la documentación

703192

Sigma-Aldrich

Indium tin oxide coated glass slide, square

surface resistivity 8-12 Ω/sq

Sinónimos:

ITO, ITO coated slide, square

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Todas las fotos(2)

About This Item

Fórmula lineal:
In2O3 · (SnO2)x
Número de CAS:
50926-11-9
Número MDL:
MFCD00171662
Código UNSPSC:
12352103
ID de la sustancia en PubChem:
329762437
NACRES:
NA.23

descripción

slide

Nivel de calidad

100

resistividad de superficie

8-12 Ω/sq

L × An × grosor

25 mm × 25 mm × 1.1 mm

transmitancia

84% (nominal at 550nm)

índice de refracción

n20/D 1.517

cadena SMILES

O=[Sn]=O.O=[In]O[In]=O

InChI

1S/2In.5O.Sn

Clave InChI

LNNWKAUHKIHCKO-UHFFFAOYSA-N

¿Está buscando productos similares? Visita Guía de comparación de productos

Categorías relacionadas

Descripción general

Indium tin oxide (ITO) is widely used as transparent conducting oxides. Its major characteristics are electrical conductivity, optical transparency and the ease to be deposited as films.
substrate: unpolished float glass, SiO2 passivated (200-300 Å)

Aplicación

ITO glass slides were used as a substrate for fabricating polymer solar cells based on blends of polymeric semiconductors and organic light emitting diodes (OLEDS). ITO substrates can also be used to design transparent heater arrays by etching the surface of the substrate by a printing tool. ITO cover slides may be used for closed digital microfluidic devices and as transparent electrodes in display and other optoelectronic devices.Some other probable uses that has been reported are:
  • Eumelanin samples prepared on ITO covered glass substrates.
  • Interface windows of the liquid cell for optical beam deflection (OBD) sensing contains a 20-nm-thick indium tin oxide film.
  • Mesoporous TiO2 films were formed on ITO conductive glasses.

Propiedades físicas

Thickness of ITO coating is 1,200-1,600 Å

Código de clase de almacenamiento

13 - Non Combustible Solids

Clase de riesgo para el agua (WGK)

WGK 3

Punto de inflamabilidad (°F)

Not applicable

Punto de inflamabilidad (°C)

Not applicable

Equipo de protección personal

dust mask type N95 (US), Eyeshields, Gloves

Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number
MKCV5862
MKCW2337
MKCX0470
MKCS9717
MKCV2256

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

Busque por un COA

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Keith A Brown et al.
Proceedings of the National Academy of Sciences of the United States of America, 110(32), 12921-12924 (2013-07-19)
Scanning probe lithography (SPL) is a promising candidate approach for desktop nanofabrication, but trade-offs in throughput, cost, and resolution have limited its application. The recent development of cantilever-free scanning probe arrays has allowed researchers to define nanoscale patterns in a
Myungjae Yang et al.
Small (Weinheim an der Bergstrasse, Germany), 14(25), e1800885-e1800885 (2018-05-29)
A method is developed to directly map nanoscale "noise-source switching" phenomena during the optoelectronic switching of phase-separated polymer nanocomposites of tetrathiafulvalene (TTF) and phenyl-C61 -butyric acid methyl ester (PCBM) molecules dispersed in a polystyrene (PS) matrix. In the method, electrical
Online coupling of digital microfluidic devices with mass spectrometry detection using an eductor with electrospray ionization.
Baker CA and Roper MG
Analytical Chemistry, 2955-2960 (2012)
High-resolution frequency-modulation atomic force microscopy in liquids using electrostatic excitation method.
Umeda K, et al.
Applied Physics Express, 3(6), 065205-065205 (2010)
Preparation of non-annealed anatase TiO< sub> 2</sub> film on ITO substrate by anodizing in hot phosphate/glycerol electrolyte for dye-sensitized solar cells.
Tsuji E, et al.
Materials Letters, 91, 39-41 (2013)
Ver todos los artículos relacionados

Artículos

Organic Semiconductor Laser Materials

In this article, we demonstrate that bis-styrylbenzene derivatives show promising characteristics for very low lasing thresholds and discuss the design considerations for organic lasing molecules.

Organic & Hybrid Electronics for Optical Analysis

Professor Shinar highlights low-cost, disposable sensor configurations in organic and hybrid electronics for healthcare applications.

Organic & Hybrid Electronics for Optical Analysis

Professor Shinar highlights low-cost, disposable sensor configurations in organic and hybrid electronics for healthcare applications.

Organic & Hybrid Electronics for Optical Analysis

Professor Shinar highlights low-cost, disposable sensor configurations in organic and hybrid electronics for healthcare applications.

Ver todo

Protocolos

Selenium Nanoparticles Applications

Selenium's roles range from essential dietary element to semiconductor in advanced applications like xerography.

Selenium Nanoparticles Applications

Selenium's roles range from essential dietary element to semiconductor in advanced applications like xerography.

Selenium Nanoparticles Applications

Selenium's roles range from essential dietary element to semiconductor in advanced applications like xerography.

Selenium Nanoparticles Applications

Selenium's roles range from essential dietary element to semiconductor in advanced applications like xerography.

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico