Saltar al contenido
Merck

Effectiveness and mechanisms of hydrogen sulfide adsorption by camphor-derived biochar.

Journal of the Air & Waste Management Association (1995) (2012-08-25)
Guofeng Shang, Guoqing Shen, Tingting Wang, Qin Chen
RESUMEN

The characteristics and mechanisms of hydrogen sulfide (H2S) adsorption on a biochar through pyrolysis at various temperatures (100 to 500 degrees C) were investigated. The biochar used in the current study was derived from the camphor tree (Cinnamomum camphora). The samples were ground and sieved to produceparticle sizes of 0.4 mm to 1.25 mm, 0.3 mm to 0.4 mm, and <0.3 mm. The H2S breakthrough capacity was measured using a laboratory-designed test. The surface properties of the biochar were characterized using pH and Fourier-transform infrared spectroscopy (FTIR) analysis. The results obtained demonstrate that all camphor-derived biochars were effective in H2S sorption. Certain threshold ranges ofthepyrolysis temperature and surfacepH were observed, which, when exceeded, have dramatic effects on the H2S adsorption capacity. The sorption capacity ranged from 1.2 mg/g to 121.4 mg/g. The biochar with 0.3 mm to 0.4 mm particle size possesses a maximum sorption capacity at 400 degrees C. The pH and FTIR analysis results showed that carboxylic and hydroxide radical groups were responsible for H2S sorption. These observations will be helpful in designing biochar as engineered sorbents for the removal of H2S.

MATERIALES
Referencia del producto
Marca
Descripción del producto

Sigma-Aldrich
(±)-Alcanfor, 96%
Sigma-Aldrich
(1R)-(+)-Camphor, 98%
Sigma-Aldrich
D-Camphor, ≥97%, FG
Sigma-Aldrich
(1S)-(−)-Camphor, 95%
Sigma-Aldrich
(±)-Alcanfor, ≥95.5%
Supelco
D-Camphor, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
(±)-Alcanfor, meets analytical specification of Ph. Eur., BP, racemic, ≥95% (GC)
Sigma-Aldrich
(±)-Alcanfor, purum, synthetic, ≥95.0% (GC)
Supelco
(−)-Camphor, analytical standard
(±)-Alcanfor, European Pharmacopoeia (EP) Reference Standard
(±)-Alcanfor, primary reference standard
Sigma-Aldrich
(±)-Alcanfor, SAJ first grade, ≥96.0%