649805

PEDOT, block PEG

solution, 1 wt. % dispersion in nitromethane, contains perchlorate as dopant

• Synonym(s): Aedotron^™ C-NM, PEDOT-block-PEG, PEDOT-b-PEG
• MDL number: MFCD06798808
• UNSPSC Code: 12352103
• NACRES: NA.23

Properties

• Product Name: Poly(3,4-ethylenedioxythiophene)-block-poly(ethylene glycol) solution, 1 wt % dispersion in nitromethane, contains perchlorate as dopant
• contains: perchlorate as dopant
• Quality Level: 100
• concentration: 1 wt % dispersion in nitromethane
• resistance: 10,000-100,000 Ω/sq (spin cast thin films: typically 1-3 layers spun at 1,000 rpm)
• work function: 4.33 eV
• description: 40 nm (RMS roughness spin cast thin films)
• particle size: 600-1000 nm (in suspension)
• conductivity: 0.1-5.0 S/cm (bulk)
• density: 1.127 g/mL at 25 °C

Description

General description

Aedotron^™ polymers are solvent-dispersable forms of PEDOT. These are copolymers of doped PEDOT and a flexible, soluble polymer such as poly(ethylene glycol) (PEG). These colloidal dispersions are stabilized by the highly solvated PEG chains which sterically limit the aggregation of the PEDOT blocks. Aedotron polymers are neither acidic nor corrosive, it easily disperses in polar aprotic solvents. Perchlorate-doped copolymers typically have a higher conductivity with thin films that are more transparent.

Please follow this link for Aedotron/Oligotron selection guide table.

Application

Conducting polymer. Useful as anti-static layers, hole-transport layers in OLED′s and various organic electronics applications (flexible circuits, capacitors, batteries).

Nitromethane dispersions can be used to cast thin films on glass, ITO, silicon wafers and many polymeric substrates. Compatibility of the polymeric substrate with nitromethane should be tested in each case. Coat the substrate with a "pool" of the nitromethane dispersion. Thin transparent films are typically spun at 1000 RPM or higher speeds, but more conducting films can be obtained at lower speeds. A single layer spun at 1000 RPM is typically 75 nm thick.

Caution

Store this product at room temperature (do not refrigerate or freeze). Some settling will normally occur. Agitate, sonicate, and filter prior to use. A plug of glass wool in a pipette can be used for easy filtration. The shelf life of this product will vary depending on how it is stored and handled. Product should be discarded if heavy aggregation occurs, or if sonication / filtering are inadequate to produce a good casting solution.

Legal Information

Aedotron is a trademark of TDA Research, Inc.

Safety Information

• Pictograms: GHS02,GHS08,GHS07
• Signal Word: Warning
• Hazard Statements: H226,H302 + H332,H351,H361d
• Precautionary Statements: P202 - P210 - P233 - P301 + P312 - P304 + P340 + P312 - P308 + P313
• Hazard Classifications: Acute Tox. 4 Inhalation - Acute Tox. 4 Oral - Carc. 2 - Flam. Liq. 3 - Repr. 2
• Storage Class Code: 3 - Flammable liquids
• WGK: WGK 2
• Flash Point(F): 96.8 °F - closed cup
• Flash Point(C): 36 °C - closed cup