Accéder au contenu
Merck
Toutes les photos(1)

Documents

Z742707

BenchMixer XLQ QuEChERs Shaker/Vortexer

AC/DC input 230 V AC, UK plug

Synonyme(s) :

dispersive solid phase extraction, vortex mixer, vortexer lab

Se connecterpour consulter vos tarifs contractuels et ceux de votre entreprise/organisme


About This Item

Code UNSPSC :
41103800
Nomenclature NACRES :
NB.73

Gamme de produits

BenchMixer

Caractéristiques

(3.6 mm orbit)

Conditionnement

pack of 1 ea

Fabricant/nom de marque

Benchmark Scientific BV1010-TST-E-UK

Paramètres

speed (500-2500 rpm)

Technique(s)

QuEChERS: suitable

L totale × l × H

15 in. (38.5 cm) × 9.2 in. (23.5 cm) × 16.5 in. (42 cm)

Plateforme, L × l

12 in. (30 cm) × 7 in. (17.8 cm)

Vous recherchez des produits similaires ? Visite Guide de comparaison des produits

Description générale

BenchMixer XLQ has been designed for use in QuEChERS and other sample prep methods. Supplied with racks for 50ml tubes held horizontally and 15ml and 1.5/2.0ml tubes held vertically, it takes the place of traditional manual shaking in these applications.

Multiple samples can be processed simultaneously in the Benchmixer XLQ′s large capacity racks, saving time and preventing operator fatigue. The vigorous, consistent shaking ensures all samples are exposed to identical conditions within the same batch of samples, as well as between batches.

The BenchMixer XLQ creates a true vortex in vertical sample racks by holding the top of the tube stationary while the bottom rotates in a 3.6mm orbit. Time and speed are precisley controlled by the digital microprocessor. A pulse mode allows for more vigorous mixing. Quiet operation, minimal vibration and a long service life are guaranteed by the precisely balanced drive system and powerful motor.

Using the BenchMixer XLQ is simple. To load the sample racks, loosen the knobs on the stationary steel rods and raise the top sample plate. One rod is shorter than the other, allowing the plate to be lifted up and swiveled to one side. After samples are loaded, lower the plate into place and tighten the knobs. Select the desired speed and run time on the digital control panel and press start. The BenchMixer XLQ can perform unattended mixing for as little as 1 minute or up to 100 hours.

While the BenchMixer XLQ is configured primarily for QuEChERS protocols, additional racks are available to accommodate nearly any type of vessel commonly found in the laboratory.

Informations légales

Benchmixer is a trademark of Benchmark Scientific, Inc.

Produit(s) apparenté(s)

Réf. du produit
Description
Tarif

Certificats d'analyse (COA)

Recherchez un Certificats d'analyse (COA) en saisissant le numéro de lot du produit. Les numéros de lot figurent sur l'étiquette du produit après les mots "Lot" ou "Batch".

Déjà en possession de ce produit ?

Retrouvez la documentation relative aux produits que vous avez récemment achetés dans la Bibliothèque de documents.

Consulter la Bibliothèque de documents

Notre équipe de scientifiques dispose d'une expérience dans tous les secteurs de la recherche, notamment en sciences de la vie, science des matériaux, synthèse chimique, chromatographie, analyse et dans de nombreux autres domaines..

Contacter notre Service technique