1.07233
Phenolphthalein
pH indicator, ACS, Reag. Ph Eur
Sinónimos:
Phenolphthalein
About This Item
Productos recomendados
product name
Phenolphthalein, indicator ACS,Reag. Ph Eur
grade
ACS reagent
Quality Level
agency
reag. Ph. Eur.
suitable for SM 2310
suitable for SM 2320
vapor pressure
<0.00001 Pa ( 50 °C)
form
solid
loss
≤1% loss on drying, 105°C
color
white to yellow-white
visual transition interval
8.2-9.8, colorless to red-violet
mp
263.7 °C
density
1.296 g/cm3 at 20 °C
bulk density
350‑450 kg/m3
λmax
551-554 nm (buffer pH 9.8)
storage temp.
2-30°C
InChI
1S/C20H14O4/c21-15-9-5-13(6-10-15)20(14-7-11-16(22)12-8-14)18-4-2-1-3-17(18)19(23)24-20/h1-12,21-22H
InChI key
KJFMBFZCATUALV-UHFFFAOYSA-N
¿Está buscando productos similares? Visita Guía de comparación de productos
Application
- Effectiveness of Phenolphthalein in Sol-Gel Coatings for Sensing and Inhibiting Corrosion on Mild Steel: Research detailing the application of phenolphthalein and Thymol Blue in sol-gel coatings, demonstrating their effectiveness in corrosion inhibition and sensing on mild steel surfaces (Patra et al., 2024).
- Highly Permeable Ultrafiltration Membranes Based on Polyphenylene Sulfone with Cardo Fragments: This article discusses the development of advanced ultrafiltration membranes incorporating phenolphthalein, enhancing their permeability and filtration efficiency (Raeva et al., 2024).
- A fluorescence-based dual sensor for Zn(2+) and PO(4)(3-): Study on a dual sensor system utilizing phenolphthalein, applied for the detection of zinc and phosphate ions in various environmental and biological samples, employing fluorescence signaling (Samanta et al., 2024).
Analysis Note
Appearance: White to yellowish white powder
Clarity of the alkoholic solution (10 g/l ethanol): passes test
Absorption maximum λmax. (buffer pH 9.8): 551 - 554 nm
Spec. Absorptivity A 1%/1cm (λmax; 0.01 g/l; buffer pH 9.8; calculated on dried substance): 700 - 750
Transition range: pH 8.2 - pH 9.8 almost colorless - red-violet
Transition range (according to ACS): passes test
Transition interval (according Reag. Ph Eur): passes test
Loss on drying (105 °C): ≤ 1 %
signalword
Danger
Hazard Classifications
Carc. 1B - Muta. 2 - Repr. 2 - Skin Irrit. 2
Storage Class
6.1C - Combustible, acute toxic Cat.3 / toxic compounds or compounds which causing chronic effects
wgk_germany
WGK 3
flash_point_f
Not applicable
flash_point_c
Not applicable
Certificados de análisis (COA)
Busque Certificados de análisis (COA) introduciendo el número de lote del producto. Los números de lote se encuentran en la etiqueta del producto después de las palabras «Lot» o «Batch»
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
Los clientes también vieron
Contenido relacionado
This page is intended to make it easier to find the consumables you need based on the analytical method you’re using. Methods included on this page come from the EPA, Standard Methods and ASTM.
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico