Passa al contenuto
Merck
  • Removal of Pb(II) ions from aqueous solution using water hyacinth root by fixed-bed column and ANN modeling.

Removal of Pb(II) ions from aqueous solution using water hyacinth root by fixed-bed column and ANN modeling.

Journal of hazardous materials (2014-04-15)
Tania Mitra, Biswajit Singha, Nirjhar Bar, Sudip Kumar Das
ABSTRACT

Hyacinth root was used as a biosorbent for generating adsorption data in fixed-bed glass column. The influence of different operating parameters like inlet Pb(II) ion concentration, liquid flow rate and bed height on the breakthrough curves and the performance of the column was studied. The result showed that the adsorption efficiency increased with increase in bed height and decreased with increase in inlet Pb(II) ion concentration and flow rate. Increasing the flow rate resulted in shorter time for bed saturation. The result showed that as the bed height increased the availability of more number of adsorption sites in the bed increased, hence the throughput volume of the aqueous solution also increased. The adsorption kinetics was analyzed using different models. It was observed that maximum adsorption capacity increased with increase in flow rate and initial Pb(II) ion concentration but decreased with increase in bed height. Applicability of artificial neural network (ANN) modeling for the prediction of Pb(II) ion removal was also reported by using multilayer perceptron with backpropagation, Levenberg-Marquardt and scaled conjugate algorithms and four different transfer functions in a hidden layer and a linear output transfer function.

MATERIALI
N° Catalogo
Marchio
Descrizione del prodotto

Sigma-Aldrich
Acido nitrico, ACS reagent, 70%
Sigma-Aldrich
Sodio idrossido, ACS reagent, ≥97.0%, pellets
Sigma-Aldrich
Sodio idrossido, reagent grade, ≥98%, pellets (anhydrous)
Sigma-Aldrich
Idrossido di sodio, 50% in H2O
Sigma-Aldrich
Acido nitrico, 70%, purified by redistillation, ≥99.999% trace metals basis
Sigma-Aldrich
Idrossido di sodio, BioUltra, for molecular biology, 10 M in H2O
Sigma-Aldrich
Sodio idrossido, BioXtra, ≥98% (acidimetric), pellets (anhydrous)
Sigma-Aldrich
Sodio idrossido, puriss., meets analytical specification of Ph. Eur., BP, NF, E524, 98-100.5%, pellets
Sigma-Aldrich
Idrossido di sodio, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
Sodio idrossido, reagent grade, 97%, powder
Sigma-Aldrich
Acido nitrico, puriss. p.a., 65.0-67.0%
Sigma-Aldrich
Sodio idrossido, pellets, semiconductor grade, 99.99% trace metals basis
Sigma-Aldrich
Sodio idrossido, puriss. p.a., ACS reagent, reag. Ph. Eur., K ≤0.02%, ≥98%, pellets
Sigma-Aldrich
Acido nitrico, puriss. p.a., reag. ISO, reag. Ph. Eur., for determinations with dithizone, ≥65%
Sigma-Aldrich
Idrossido di sodio, 5.0 M
Sigma-Aldrich
Sodio idrossido, puriss. p.a., ACS reagent, K ≤0.02%, ≥98.0% (T), pellets
Sigma-Aldrich
Sodio idrossido, beads, 16-60 mesh, reagent grade, 97%
Sigma-Aldrich
Sodio idrossido, reagent grade, 97%, flakes
Sigma-Aldrich
Acido nitrico, red, fuming, HNO3 >90 %
Sigma-Aldrich
Acido nitrico, puriss. p.a., ≥65% (T)
Sigma-Aldrich
Sodio idrossido, BioUltra, for luminescence, ≥98.0% (T), pellets
Sigma-Aldrich
Idrossido di sodio, purum, ≥32%
Supelco
Idrossido di sodio, 0.1 M NaOH in water (0.1N), Eluent concentrate for IC
Supelco
Acido nitrico, 0.1 M HNO3 in water (0.1N), eluent concentrate for IC
Sigma-Aldrich
Acido nitrico, ACS reagent, ≥90.0%
Supelco
Idrossido di sodio, 49-51% in water, eluent for IC
Sigma-Aldrich
Sodium hydroxide-16O solution, 20 wt. % in H216O, 99.9 atom % 16O
Sigma-Aldrich
3-Ethyl-2,4-pentanedione, mixture of tautomers, 98%
Sigma-Aldrich
Nitric-14N acid solution, ~10 N in H2O, 99.99 atom % 14N
Sigma-Aldrich
Sodio idrossido, anhydrous, free-flowing, Redi-Dri, reagent grade, ≥98%, pellets