Interactions between nitric oxide and plant hormones in aluminum tolerance.

Interactions between nitric oxide and plant hormones in aluminum tolerance.

Plant signaling & behavior (2012-04-14)

Huyi He, Longfei He, Minghua Gu

ABSTRACT

Nitric oxide (NO) is involved, together with plant hormones, in the adaptation to Al stress in plants. However, the mechanism by which NO and plant hormones interplay to improve Al tolerance are still unclear. We have recently shown that patterns of plant hormones alteration differ between rye and wheat under Al stress. NO may enhance Al tolerance by regulating hormonal equilibrium in plants, as a regulator of plant hormones signaling. In this paper, some unsolved issues are discussed based on recent studies and the complex network of NO and plant hormones in inducing Al tolerance of plants are proposed.

MATERIALI

N° Catalogo

Marchio

Descrizione del prodotto

11009

Sigma-Aldrich

Aluminum, powder, ≥91% (complexometric)

266558

Sigma-Aldrich

Aluminum, wire, diam. 1.0 mm, 99.999% trace metals basis

518573

Sigma-Aldrich

Aluminum, granular, <1 mm, 99.7% trace metals basis

326852

Sigma-Aldrich

Aluminum, foil, thickness 0.25 mm, 99.999% trace metals basis

338788

Sigma-Aldrich

Aluminum, pellets, 3-12 mm, 99.99% trace metals basis

266523

Sigma-Aldrich

Aluminum, ReagentPlus^®, beads, 5-15 mm, 99.9% trace metals basis

266574

Sigma-Aldrich

Aluminum, foil, thickness 0.45-0.55 mm, 99.999% trace metals basis

310360

Sigma-Aldrich

Aluminum, ACS reagent, 99%, wire, wire diam. ~1.5 mm

326860

Sigma-Aldrich

Aluminum, foil, thickness 0.13 mm, ≥99.99% trace metals basis

326887

Sigma-Aldrich

Aluminum, wire, diam. 0.58 mm, ≥99.99% trace metals basis

733369

Sigma-Aldrich

Aluminum, foil, thickness 8 μm, 99% trace metals basis

GF44675781

Aluminum, rod, 1000mm, diameter 12.7mm, 99%

266957

Sigma-Aldrich

Aluminum, foil, thickness 1.0 mm, 99.999% trace metals basis

433705

Sigma-Aldrich

Aluminum, evaporation slug, diam. × L 6.3 mm × 6.3 mm, 99.999% trace metals basis

326941

Sigma-Aldrich

Aluminum, pellets, 3-8 mesh, ≥99.999% trace metals basis

GF98718935

Aluminum, sphere, 100pcs, diameter 1.0mm, aluminum alloy 2017 precision sphere, grade 200, 95.2%

GF24569602

Aluminum, foam, 150x150mm, thickness 30mm, bulk density 0.2g/cm³, porosity 0.93, aluminum 6101 grade, 98.5%

GF26812043

Aluminum, foam, 150x150mm, thickness 3.2mm, bulk density 0.2g/cm³, porosity 0.93, 16 pores/cm, aluminum 6101 grade, 98.5%

GF94706354

Aluminum, mesh, 150x150mm, nominal aperture 0.38mm, wire diameter 0.25mm, 40x40 wires/inch, open area 37%, plain weave mesh

GF51598761

Aluminum, rod, 200mm, diameter 12.7mm, 99%

GF29732496

Aluminum, tube, 200mm, outside diameter 3.0mm, inside diameter 1.62mm, wall thickness 0.69mm, hard, 99.5%

GF64700524

Aluminum, rod, 1000mm, diameter 5.0mm, as drawn, 99.999%

GF32029444

Aluminum, rod, 100mm, diameter 12.7mm, 99%

GF51278070

Aluminum, honeycomb, 300x300mm, thickness 10mm, cell size 3.2mm, cell wall 0.025mm, core density 0g/cm³, phenolic adhesive (resin), 99.5%

GF95825403

Aluminum, sphere, 100pcs, diameter 3.0mm, aluminum alloy 2017 precision sphere, grade 200, 95.2%

GF40979773

Aluminum, rod, 500mm, diameter 6.0mm, as drawn, 99.999%

GF63629219

Aluminum, tube, 500mm, outside diameter 1.42mm, inside diameter 1.166mm, wall thickness 0.127mm, as drawn, 99.5%

GF96312326

Aluminum, honeycomb, 600x600mm, thickness 26.5mm, cell size 6.3mm, cell wall 0.064mm, core density 0.083g/cm³, phenolic adhesive (resin), facing skin carbon fiber / epoxy, 99.9%

GF38294646

Aluminum, mesh, 300x300mm, nominal aperture 0.38mm, wire diameter 0.25mm, 40x40 wires/inch, open area 37%, plain weave mesh

GF19881928

Aluminum, honeycomb, 300x300mm, thickness 20mm, cell size 3.2mm, cell wall 0.025mm, core density 0.072g/cm³, phenolic adhesive (resin), 99.5%