Passa al contenuto
Merck

Determination of barbiturates in urine by micellar liquid chromatography and direct injection of sample.

Journal of pharmaceutical and biomedical analysis (2000-03-07)
Y Martín-Biosca, S Sagrado, R M Villaneuva-Camañas, M J Medina-Hernández
ABSTRACT

A liquid chromatographic procedure for the determination of six barbiturates (barbital, diallyl barbituric acid, phenobarbital, butabarbital, amobarbital and pentobarbital) in urine samples is described. The proposed system uses a Spherisorb octadecyl-silane ODS-2 C18 analytical column and a guard column of similar characteristics. The UV detector was set at 240 nm. A study to select adequate composition of the micellar mobile phase for the separation of these compounds in urine samples is performed. Maximum resolution was achieved with a 0.07 M sodium dodecylsulphate-0.3% propanol at pH 7.4 eluent. Limits of detection at 240 nm were ranged between 0.13 microg ml(-1) for diallyl barbituric acid and 2.7 microg ml(-1) for amobarbital. The procedure allows for the determination of these compounds in 20 minutes, it does not require prior a sample preparation step and it can be very useful to the investigation of intoxication.

MATERIALI
N° Catalogo
Marchio
Descrizione del prodotto

Sigma-Aldrich
Sodium 1-dodecanesulfonate, ReagentPlus®, ≥99%
Supelco
Butabarbital solution, 1.0 mg/mL in methanol, ampule of 1 mL, certified reference material, Cerilliant®