1.17354

MAS-100 Atmos^® Pressure Tube

tube L 2 m, for use with MAS-100 Atmos^®

• Codice UNSPSC: 41103403
• NACRES: NA.74

Proprietà

• Materiali: PTFE tube
• Conformità normativa: FDA
• Descrizione: Compressed gas sampling
• Caratteristiche: autoclavable
• Produttore/marchio commerciale: MAS-100 Atmos^®
• Lunghezza: 2 m
• applicazioni: compressed gas monitoring; cosmetics; food and beverages; pharmaceutical
• Compatibilità: for use with MAS-100 Atmos^®

Descrizione

Descrizione generale

MAS-100 Atmos^® Pressure tube is a PTFE tubing for compressed gas sampling connected via the pressure tube set.
The PTFE tube is 2m long and supplied with one 34mm tri-clamp adapter and silicone gasket on one end, fitting to the sampling head. The other end is connected using a universal 3/8′′ threaded female connector to enable gas supply.
One set of MAS-100 Atmos^® Pressure Tube is included in the scope of delivery. The same set can be ordered as a separate accessory, if needed for back up e.g. while autoclaving.

Applicazioni

MAS-100 Atmos^® Pressure tube is used for compressed gas sampling. The pressure tube kit is suitable to supply test gases from source to the test environment.

Componenti

1 x PTFE tube (2m)
1 x Tri clamp (34mm diameter)
1 x Silicone gasket (34/10mm)
1 x 3/8′′ BSP female connector

Altre note

Steps to connect the MAS-100 Atmos^® Pressure tube

• Connect the end of the pressure connection tubing with the universal 3/8-inch connector (female) to the closed gas supply at the sampling location. The gas supply must be equipped with a male 3/8-inch connector to fit to the pressure connection tubing of MAS-100 Atmos^®. Ensure the connection is secured and there is no possibility of a leak
• Place the silicone gasket on top of the closed sampling head and fix the pressure connection tubing with the 34mm tri-clamp to the sampling head.

Note legali

MAS-100 Atmos is a registered trademark of MBV AG