TRD3D0018

Fusion PLA 3D Printing Filament

neptune blue, diam. 1.75 mm

• Codice UNSPSC: 12162002
• NACRES: NA.23

Proprietà

• Caratteristiche più verdi: Design for Energy Efficiency; Learn more about the Principles of Green Chemistry.
• sustainability: Greener Alternative Product
• Diametro: 1.75 mm
• Peso: 750 geach
• Categoria alternativa più verde: , Enabling

Descrizione

Descrizione generale

We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product belongs to Enabling category of greener alternatives thus aligns with "Design for energy efficency". 3D printed items can be lighter when critically designed with newer shapes and internal geometry, which many times are differenr from what contemporary machining techniques can produce. This change requies lower energy and reduce pollution. Click here for more information.

Fusion PLA:

• Developed specifically for long timed-prints
• Special formulation avoids nozzle clogging
• Odourless composition and low warping
• No more high speed retraction problems

Material Properties

• Density: 1.24 g/cm3
• Tensile modulus: 65.5 Mpa
• Vicat point: 55-60 °C
• Melting point: 144 °C

Applicazioni

This product can be used in material extrusion 3D printing technique.

Fusion PLA 3D Printing Parameters

• Extruder (nozzle) temperature: 190 +/-10 °C
• Bed temperature: cold to 70 °C
• Print speed: 60-80 mm/s
• Fan: 50-100 %
• Minimum nozzle diameter: 0.3 mm
• Plate materials: glass, blue tape, etc.

Informazioni sulla sicurezza

• Codice della classe di stoccaggio: 11 - Combustible Solids
• Classe di pericolosità dell'acqua (WGK): WGK 3
• Punto d’infiammabilità (°F): Not applicable
• Punto d’infiammabilità (°C): Not applicable