Passa al contenuto
Merck
Tutte le immagini(3)

Documenti

428302

Sigma-Aldrich

Polysulfone

average Mw ~35,000 by LS, average Mn ~16,000 by MO, pellets (Transparent)

Sinonimo/i:

Poly[oxy-1,4-phenylenesulfonyl-1,4-phenyleneoxy-1,4-phenylene(1-methylethylidene)-1,4-phenylene], Polysulfone resin

Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali
Tutte le immagini(3)

About This Item

Formula condensata:
[C6H4-4-C(CH3)2C6H4-4-OC6H4-4-SO2C6H4-4-O]n
Numero CAS:
25135-51-7
Numero MDL:
MFCD00134387
Codice UNSPSC:
12162002
ID PubChem:
24866807
NACRES:
NA.23

Forma fisica

pellets (Transparent)

Temp. autoaccensione

1022 °F

Indice di fluidità

6.5 g/10 min (343°C/0.3 Mpa)

PM

average Mn ~16,000 by MO
average Mw ~35,000 by LS

Viscosità ridotta

0.37-0.39 dL/g, 0.2 % (w/v) in chloroform(25 °C)(lit.)

Densità

1.24 g/mL at 25 °C (lit.)

Stringa SMILE

CC(C)(c1ccc(O)cc1)c2ccc(O)cc2.Oc3ccc(cc3)S(=O)(=O)c4ccc(O)cc4

Cerchi prodotti simili? Visita Guida al confronto tra prodotti

Categorie correlate

Applicazioni

Microwave cookware, appliance covers, surgical tools, automotive electrical components, printed circuit boards and plumbing components.

Caratteristiche e vantaggi

High impact resistance. Temperature use range up to 160°C. Exceptional steam sterilization stability. Electrical properties are maintained over a wide temperature and frequency range. High resistance to radiation degradation.

Stato fisico

Thermoplastic engineering polymer.

Codice della classe di stoccaggio

11 - Combustible Solids

Classe di pericolosità dell'acqua (WGK)

WGK 3

Punto d’infiammabilità (°F)

Not applicable

Punto d’infiammabilità (°C)

Not applicable

Dispositivi di protezione individuale

Eyeshields, Gloves, type N95 (US)

Certificati d'analisi (COA)

Cerca il Certificati d'analisi (COA) digitando il numero di lotto/batch corrispondente. I numeri di lotto o di batch sono stampati sull'etichetta dei prodotti dopo la parola ‘Lotto’ o ‘Batch’.

Possiedi già questo prodotto?

I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.

Visita l’Archivio dei documenti

I clienti hanno visto anche

Slide 1 of 6

1 of 6

Poly(oxy-1,4-phenylenesulfonyl-1,4-phenylene) melt index 6 g/10 min (380°C/2.16 kg)

Sigma-Aldrich

472360

Poly(oxy-1,4-phenylenesulfonyl-1,4-phenylene)

vibrant-m

GF94809842

Polysulfone

Polyethersulfone (PES), granule, 3 mm nominal granule size, weight 100 g, clear amber

GF41434398

Polyethersulfone

Polysulfone (PSU), film, thickness 0.025 mm, size 300 × 300 mm

GF26827757

Polysulfone

Polysulfone (PSU), film, thickness 0.025 mm, L 1 m

GF61652707

Polysulfone

Polyethersulfone (PES), granule, 3 mm nominal granule size, weight 500 g, clear amber

GF37900436

Polyethersulfone

M U M Junaidi et al.
Water science and technology : a journal of the International Association on Water Pollution Research, 67(9), 2102-2109 (2013-05-10)
Although ultrafiltration (UF) membranes are applicable in wastewater and water treatment, most UF membranes are hydrophobic and susceptible to severe fouling by natural organic matter. In this work, polysulfone (PSf) membrane was blended with silicaluminophosphate (SAPO) nanoparticles, SAPO-34, to study
Sara M Viganò et al.
The International journal of artificial organs, 35(5), 346-351 (2012-06-12)
Anemia in chronic kidney disease dialysis patients is a complex syndrome involving many causes. Adequate dialysis can contribute to its correction through many mechanisms, including the removal of molecules that may inhibit erythropoiesis. The aim of this pilot study was
Masahide Koremoto et al.
Artificial organs, 36(10), 901-910 (2012-08-01)
Currently, there are no detailed reports on the effects of vitamin E-bonded polysulfone (PS) membrane dialyzers on intradialytic hypotension (IDH) in diabetic hemodialysis (HD) patients. This study was designed to evaluate changes in intradialytic systolic blood pressure (SBP) using "VPS-HA"
Christopher G Arges et al.
Proceedings of the National Academy of Sciences of the United States of America, 110(7), 2490-2495 (2013-01-22)
Anion exchange membranes (AEMs) find widespread applications as an electrolyte and/or electrode binder in fuel cells, electrodialysis stacks, flow and metal-air batteries, and electrolyzers. AEMs exhibit poor stability in alkaline media; their degradation is induced by the hydroxide ion, a
[Carpal tunnel syndrome in chronic hemodialysis patients].
Houda Mbarki et al.
The Pan African medical journal, 14, 19-19 (2013-03-19)
Visualizza tutti i documenti correlati

Articoli

Materials in Polymer Electrolyte Membrane Fuel Cells

Polymer electrolyte membrane (PEM) fuel cells offer high efficiency and low-temperature operation, reducing oil use in light-duty vehicle transportation.

Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..

Contatta l'Assistenza Tecnica.