Accéder au contenu
Merck

Determination of buprenorphine, fentanyl and LSD in whole blood by UPLC-MS-MS.

Journal of analytical toxicology (2013-02-21)
Thomas Berg, Benedicte Jørgenrud, Dag Helge Strand
RÉSUMÉ

A sensitive ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS-MS) method has been developed and validated for the quantification of buprenorphine, fentanyl and lysergic acid diethylamide (LSD) in whole blood. Sample preparation was performed by liquid-liquid extraction (LLE) with methyl tert-butyl ether. UPLC-MS-MS analysis was performed with a mobile phase consisting of ammonium formate (pH 10.2) and methanol. Positive electrospray ionization MS-MS detection was performed with two multiple reaction monitoring transitions for each of the analytes and the deuterium labeled internal standards. Limit of detection values of buprenorphine, fentanyl and LSD were 0.28, 0.044 and 0.0097 ng/mL and limit of quantification values were 0.94, 0.14 and 0.036 ng/mL, respectively. Most phospholipids were removed during LLE. No or only minor matrix effects were observed. The method has been routinely used at the Norwegian Institute of Public Health since September 2011 for qualitative and quantitative detections of buprenorphine, fentanyl and/or LSD in more than 400 whole blood samples with two replicates per sample.

MATÉRIAUX
Référence du produit
Marque
Description du produit

Sigma-Aldrich
Acide formique, reagent grade, ≥95%
Sigma-Aldrich
tert-Butyl méthyl éther, suitable for HPLC, ≥99.8%
Sigma-Aldrich
Acide formique, ACS reagent, ≥96%
Sigma-Aldrich
Acide formique, puriss. p.a., ACS reagent, reag. Ph. Eur., ≥98%
Sigma-Aldrich
Formiate d'ammonium, reagent grade, 97%
Sigma-Aldrich
tert-Butyl méthyl éther, ACS reagent, ≥99.0%
Sigma-Aldrich
tert-Butyl méthyl éther, HPLC Plus, for HPLC, GC, and residue analysis, 99.9%
Sigma-Aldrich
Acide formique, puriss., meets analytical specifications of DAC, FCC, 98.0-100%
Sigma-Aldrich
Formiate d'ammonium, ≥99.995% trace metals basis
Sigma-Aldrich
Formiate de sodium, ACS reagent, ≥99.0%
Sigma-Aldrich
Acide formique, ACS reagent, ≥88%
Sigma-Aldrich
tert-Butyl méthyl éther, reagent grade, ≥98%
Sigma-Aldrich
Ammonium formate solution, BioUltra, 10 M in H2O
Sigma-Aldrich
tert-Butyl méthyl éther, puriss. p.a., ≥99.5% (GC)
Sigma-Aldrich
Potassium formate, ReagentPlus®, 99%
Supelco
LSD solution, 25 μg/mL in acetonitrile, ampule of 1 mL, certified reference material, Cerilliant®
Supelco
LSD solution, 1.0 mg/mL in acetonitrile, ampule of 1 mL, certified reference material, Cerilliant®
Sigma-Aldrich
Formiate de sodium, reagent grade, 97%
Sigma-Aldrich
Acide formique, ≥95%, FCC, FG
Supelco
Formiate d'ammonium, eluent additive for LC-MS, LiChropur, ≥99.0%
Sigma-Aldrich
Formiate de sodium, BioUltra, ≥99.0% (NT)
Sigma-Aldrich
Cesium formate, 98%
Sigma-Aldrich
Formiate de sodium, 99.998% trace metals basis
Sigma-Aldrich
Sodium formate-13C, 99 atom % 13C
Sigma-Aldrich
Calcium formate, BioUltra, ≥99.0% (T)
Sigma-Aldrich
tert-Butyl méthyl éther, reagent grade, 98%
Sigma-Aldrich
Acide formique solution, BioUltra, 1.0 M in H2O
Sigma-Aldrich
Formiate d'ammonium, BioUltra, ≥99.0% (calc. based on dry substance, NT)
Sigma-Aldrich
Potassium formate, BioUltra, ≥99.0% (NT)
Sigma-Aldrich
Thallium(I) formate, 97%